Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Are GPIB Bus Extenders Compatible with Other Extenders? Are the GPIB bus extenders compatible with each other? I am trying to use a GPIB-130 with a GPIB-100A and cannot link the two. URL: http://digital.ni.com/public.nsf/allkb/BC966EFDAEFA469A86256B2100720382

GPIBバスエクステンダーは互いに互換性がありますか？ GPIBバスエクステンダーは互いに互換性がありますか？GPIB-100A とGPIB-130を一緒に使用してみたが、繋ぐことはできません。 URL: http://digital.ni.com/public.nsf/allkb/C2011852864D845086256F14005C14AC

複数のGPIBエクステンダーをひとつのGPIBバスで使用できますか？ 複数のGPIBエクステンダーをひとつのGPIBバスで使用できますか？ URL: http://digital.ni.com/public.nsf/allkb/11F65853A0214D2E86256E1200391B87

Are the GPIB-140 and the GPIB-140A Fiber-Optic GPIB Extenders Compatible? Are the GPIB-140 and the GPIB-140A fiber-optic GPIB extenders compatible? URL: http://digital.ni.com/public.nsf/allkb/62DE701E5644CFA3862569BC004E6C2F

GPIB-140 と GPIB-140Aは互換性がありますか？ 問題: GPIB-140 と GPIB-140Aは互換性がありますか？ 解決策: GPIB-140 と GPIB-140Aはデータ転送に違うプロトコルを使用しています。さらに転送スピードも違います（HS488使用GPIB-140 = 2.2 MB/s ; HS488使用でGPIB-140A = 2. URL: http://digital.ni.com/public.nsf/allkb/B5602C7DE00660DB86256E120025C700

Scan For Instruments Fails With GPIB-120A When I am using a GPIB-120A, I see listeners on every possible GPIB address, which do not actually exist. I see this behavior using Scan for Instruments in Measurement and Automation Explorer, as well as with the URL: http://digital.ni.com/public.nsf/allkb/8F88B23FDA4E08AB8625667500585648

What Are the DIP Switch Settings for the GPIB-400? Problem: What are the DIP switch settings for the GPIB-400? Solution: The GPIB-400 is an older product that National Instruments produced. It is a GPIB bus tester that has toggle switches on the front for controlling different GPIB lines. URL: http://digital.ni.com/public.nsf/allkb/C620DD20C14237B78625653A00579117

GPIB-140用の光ファイバーはどのように選べばよいのでしょうか？ GPIB-140用の光ファイバーについて情報を探している。この情報はどこにありますか？ URL: http://digital.ni.com/public.nsf/allkb/34963F215F744A9386256F140059EAAF

What Are The Coaxial Cable Requirements For A GPIB-110? The GPIB-110 requires a cable capacitance of 56.8pF/m and an attenuation of 0.023 dB/m for a distance of up to 1000m. If a particular cable's capacitance and/or attenuation is higher, then that cable must be equivalently shorter than 1000m. URL: http://digital.ni.com/public.nsf/allkb/5523D898EFA701E9862563540075FB46

Trying to use GPIB-130 and FINDLSTN or ibln. FINDLSTN and ibln are not useful commands when being used with the GPIB-130. The GPIB-130 Bus Extender listens to every primary address regardless of whether or not the GPIB-130s are in buffered or unbufferd mode. If the GPIB-130 Bus Extender is being used, FINDLSTN will find a listener at every URL: http://digital.ni.com/public.nsf/allkb/613865AF40A2EBD8862562FB0052EEB5