Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

The cRIO 985x Interprets Standard Arbitration IDs as Extended Format when I Use Both Formats. If I use an extended CAN arbitration ID (29-bit identifier, ex: 0x20010001) with my program, the cRIO FPGA CAN I/O node receives the correct arbitration ID (ex. 0x20010001). However, if I then use the standard CAN arbitration ID format (11 bit identifier, 0x101) in my program, the cRIO FPGA URL: http://digital.ni.com/public.nsf/allkb/D1F8A60C633CF273862572BA005A7037

Program a Maxon EPOS Motion Controller from LabVIEW How can I communicate with my EPOS (Easy Positioning System) controller from Maxon? URL: http://digital.ni.com/public.nsf/allkb/F2F553B7B2E3FC10862572AC0023FCA0

Using the PCMCIA-CAN Synchronization Cable The PCMCIA-CAN synchronization cable goes from a connector to ten wires. How should I connect them to my DAQ card to synchronize the two NI Hardware cards? URL: http://digital.ni.com/public.nsf/allkb/0097494FFFF9236F8625729E006CC57C

Programmatically Changing the Baud Rate of the NI 9852 CAN Module I need to change the baud rate of a port on my NI 9852 CompactRIO CAN module from the default of 500 Kbps. How do I do this? URL: http://digital.ni.com/public.nsf/allkb/6C96F9DFB0223C138625729700598952

Do I need to Install Support for Shared Variable on TPC-2012? I have an application using shared variables developed to run on TPC-2012. However, the install option on the project explorer is only available for ARM-based processor. How do I install support for shared variable on TPC-2012? URL: http://digital.ni.com/public.nsf/allkb/D1615074B10ACA5A862572910055971A

Using an External Transceiver with a National Instruments CAN Board I have an external transceiver on my CAN network, and I want to use it with my NI-CAN board. How do I do this? URL: http://digital.ni.com/public.nsf/allkb/43798AA7165B1F8486257290006B6141

Executable Not a Valid Windows CE Application When I run my Windows CE executable I get the following error message: Why am I getting this error and how can I fix it? URL: http://digital.ni.com/public.nsf/allkb/2EC2348BE5008F9E8625728A0068C4E2

Executable Not a Valid Windows CE Applicationとエラー表示 Windows CEのexeファイルを実行しているとき、次のようなエラーメッセージが表示されます。 このようなエラーが起こるのは■> URL: http://digital.ni.com/public.nsf/allkb/83D9701E989EE5578625729200297EEC

Changing the PXI-8461 Default Protocol from CAN to DeviceNET I would like to use my PXI-8461 as a DeviceNET device. How do I change the protocol? URL: http://digital.ni.com/public.nsf/allkb/4026CFF8DDA7A08086257289007FFCD3

Where Can I Find The Warranty For My NI Hardware? I'm trying to find the warranty information for my NI hardware. Where can I find it? URL: http://digital.ni.com/public.nsf/allkb/8341879DC763DF5886257289005D816E