Cart
|
Help
NI Home
>
Support
> KnowledgeBase
KnowledgeBase
Select your country
Category(s) Selected
[
start over
]
Hardware
:
Industrial Communications
/ Fieldbus [
remove
] ,
21-26 of
26
KnowledgeBase [
see results below
]. To refine your results, select another category.
Software
LabVIEW Modules
(1)
Driver Software
(8)
Hardware
AT-FBUS
(7)
AT-FBUS/2
(3)
FBUS-HSE/H1
(3)
FP-3000
(9)
PCI-FBUS
(4)
PCI-FBUS/2
(3)
PCMCIA-FBUS
(6)
PCMCIA-FBUS Series 2
(3)
PCMCIA-FBUS/2
(3)
PCMCIA-FBUS/2 Series 2
(3)
Question Type
Bug Fix/ Error Message/ Error Code
(1)
FAQ
(1)
Install/Config
(5)
Programming
(3)
Specifications/ Documentation
(16)
Document Languages
English
(21)
Spanish
(1)
Japanese
(2)
Chinese (Simplified)
(2)
Search KnowledgeBase Documents:
Sort by:
Date (Most recent)
Title (A-Z)
21-26 of
26
Previous
Could Supplying Insufficient Power Cause Problems With the FP-3000?
Problem: Could supplying insufficient power cause problems with the FP-3000? Solution: Yes. The FP-3000 requires 6 watts of power. If a smaller power supply is connected to the module it will not function properly.
URL:
http://digital.ni.com/public.nsf/allkb/642B15EEFCE8228D862568C0007B4A26
What Kind of Data Throughput Should I Expect from an FP-3000?
Add the worst-case function block execution time for each function block in the loop to this minimum. A PID control loop has one AI, one PID, and one AO block. Together they take 20 ms.
URL:
http://digital.ni.com/public.nsf/allkb/97DFE6962AB1D9BC862568490075065F
How Many PID Loop Iterations per Second Can the FP-3000 Run?
Problem: I would like to know how fast I can run a PID loop on an FP-3000. Solution: Summary The FP-3000 can run approximately 50-60 PID loop iterations per second.
URL:
http://digital.ni.com/public.nsf/allkb/862567530005F09C8625675800703EA8
Redundancy in Fieldbus Using Two Fieldbus Interfaces
I would like to implement Redundancy using two Fieldbus interfaces, the first one will be the active controller and the second one the standby controller. Is there any method to develop this?
URL:
http://digital.ni.com/public.nsf/allkb/3AFF99CC2E06CE0986256624006654F4
'Board Cannot Be Found' Error When Launching NI-FBUS on Windows NT
When launching NI-FBUS on Windows NT, I receive an error stating the board cannot be found. What might cause this problem?
URL:
http://digital.ni.com/public.nsf/allkb/7F5EFBCCEBBDB6D78625661100760C2E
Why Can't I Download the Monitor Software to the AT-FBUS/PCMCIA-FBUS Card?
If there is a problem communicating to the memory address used by the interface card, it is not possible to download the monitor software to the card. This will cause the NI-FBUS monitor to not work. Upon opening the software, it attempts to download the monitor stack to the card. This fails and
URL:
http://digital.ni.com/public.nsf/allkb/0868A8D231282111852564430058E26B
Sort by:
Date (Most recent)
Title (A-Z)
21-26 of
26
Previous
Search KnowledgeBase Documents: