Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

DeviceNet和CAN有什么不同？ DeviceNet和CAN(Controller Area Network)之间有何关系？NI-CAN和NI-DNET有何不同？ URL: http://digital.ni.com/public.nsf/allkb/9EBCF9C6812FC9E2482571EF0036C4D7

Get Poll Connection Input & Output Size and Set the Connection Attributes My DeviceNet slave device supports Poll connection. I want to get the slave device input/output size by programming as Configurator (SimpleWho in the older NI-DNET version) does. What's more, I want to set the related producer/consumer path. URL: http://digital.ni.com/public.nsf/allkb/04114873FFF97BB3482571990008758A

Integrate NI DeviceNet Interface into a PLC-based DeviceNet Network I have a DeviceNet network with the Allen-Bradley PLC as the DeviceNet master. I use RSLinx, RSNetworx and RSLogix to configure the DeviceNet devices. How can I integrate a National Instruments PXI system into my existing network? URL: http://digital.ni.com/public.nsf/allkb/FF5A2B77E6F12BF04825717300086F4C

NI-DNET with Group 2 (M/S) and Group 3 (UCMM) Messaging Does NI-DNET support Group 2 (Master/Slave) and Group 3 messaging (UCMM)? URL: http://digital.ni.com/public.nsf/allkb/75F5BB08925827698625715D00512609

Can I Programmatically Change the Baud Rate of My DeviceNet Device? I want to change the Baud Rate of my DeviceNet device programmatically. How can I do this? URL: http://digital.ni.com/public.nsf/allkb/491579A031A894448625715100410A46

DeviceNet 장비의 Baud Rate를 프로그램적으로 바꿀수 있습니까? DeviceNet 장비의 Baud Rate를 프로그램적으로 바꾸고 싶습니다. 어떻게 하면 이렇게 할수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/C9A33E95A963BF15862571540015B150

PCMCIA-CAN Compatibility With 16-bit PCMCIA Interfaces Can a PCMCIA-CAN card be used in a 16-bit PCMCIA interface, or is a 32-bit interface required? URL: http://digital.ni.com/public.nsf/allkb/DFCAB3AFA04B2E14862571320070C49B

PCMCIA-CAN 카드의 16비트PCMCIA 인터페이스와의 호환성. PCMCIA-CAN 카드를 16비트PCMCIA 인터페이스에서, 혹은 32비트 인터페이스에서 사용될수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/8BC63D9F68F388848625713A0004D731

NI-CAN (NI-DNET) RT 하드웨어 설정을 할때 발생하는 NI-CAN RPC Server 메세지 창. RT 타겟에 설치된 NI-CAN (NI-DNET) 하드웨어를 설정하고 테스트하려고 합니다. 그러나 시도할때마다, 다음과 같은 메세지가 발생합니다.:■> URL: http://digital.ni.com/public.nsf/allkb/DA92C3FCCD5B5945862570C200034F7D

NI-CAN RPC Server Dialog When Accessing NI-CAN (NI-DNET) RT Hardware Configuration I am trying to test and configure my NI-CAN (NI-DNET) hardware installed on my RT target. However each time I try to do so, I get the following message: URL: http://digital.ni.com/public.nsf/allkb/0903CD98DA3305FD8625707E00651AEC