Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Configuring the NI MES-3980 IP Address and Accessing the Web Console I need to configure the NI MES-3980 for a static or dynamic IP address and then access the web browser to configure settings. How can I get this accomplished? URL: http://digital.ni.com/public.nsf/allkb/5983CCB59977B3DC862573D0006156D6

FieldPoint OPC Server Update Rate Problem: At what rate does the OPC Server for FieldPoint update? Solution: The update rate is 10 ms, and it cannot be changed. The figure below summarizes how an OPC Server communicates with a FieldPoint Controller. URL: http://digital.ni.com/public.nsf/allkb/8DB8D79FF4AD0E85862573CB00772F6B

Unexpected Relay Behavior on [c]FP-RLY-42x Modules When I write to one or more channels on a [c]FP-RLY-42x module, other channels on that module or adjacent modules exhibit unexpected behavior. Why is that? URL: http://digital.ni.com/public.nsf/allkb/246152C8859CE715862573C60070728F

Can a cFP-CTR-502 Module Measure a 50KHz Signal? I would like to sample a 50KHz signal with my cFP-CTR-502 module, but the internal frequency references are 1KHz and 32KHz. URL: http://digital.ni.com/public.nsf/allkb/0C61D6B3FE540422862573AA007EB2C9

cFP-CTR-502模块可以测量50KHz信号吗？ 我想要用cFP-CTR-502测量一个50KHz的信号，但是内部的参考时钟为1kHz与32Hz.这样可以吗？ URL: http://digital.ni.com/public.nsf/allkb/C7A829DAECBF859C862573D70046117E

Can My [c]FP 2xxx Controller Use a VISA TCP/IP Resource to Communicate With an LXI Instrument? I am using a [c]FP 2xxx controller and I am trying to communicate with an LXI instrument. I am using the correct VISA TCP/IP Resource string, but I get error message Error -1073807343: Insufficient location URL: http://digital.ni.com/public.nsf/allkb/0B0A92FEAE3D42A4862573A8001368E1

How Do I Use the Digital Input/Output Lines on my 7330, 7340, or 7350 Motion Controller Card? How do I program the Digital Input/Output (DIO) lines on my NI 7330, 7340, or 7350 Motion Controller card? URL: http://digital.ni.com/public.nsf/allkb/2D238C3BF101620C862573A60081BFFE

What is the Difference Between a Soft Reboot and a Hard Reboot on a Real-Time FieldPoint Controller? What is the difference between a soft reboot and a hard reboot on a real-time FieldPoint controller? URL: http://digital.ni.com/public.nsf/allkb/C268F401137B3D14862573A600771CB4

Why Are There Yellow Triangles With Exclamation Marks by My FieldPoint Devices or by My VIs When I open my LabVIEW project I see yellow triangles with exclamation marks next to my FieldPoint Devices or my VIs. Why are these here? Can I get rid of them? URL: http://digital.ni.com/public.nsf/allkb/C767A8CC189E5F2B862573A600742C4D

Why Does my [c]FP-DO-400/401 Have Channels Stuck in the On Position? My [c]FP-DO-400/401 has channels stuck in the ON position, but the LEDs function properly. The module only outputs a high voltage. What happened? How can I avoid this in the future? URL: http://digital.ni.com/public.nsf/allkb/C2CD6CC94089E477862573A60074DADF