Why Do I Get Error -32812 When I Read or Write to a cFP-180x from a cFP-2xxx?
Why do I get Error -32812 when I read or write to a cFP-180x from a cFP-2xxx?
URL: http://digital.ni.com/public.nsf/allkb/80A4EF3A7A1784D6862573F4000B20C5
|
Different Types of Isolation: Channel-to-Channel, Bank (Channel-to-Bus), and Channel-to-Earth Ground Isolation
What are the differences between the types of electrical isolation NI offers on devices? I do not understand the differences between channel-to-channel, bank (channel-to-bus), and channel-to-earth ground isolation.
URL: http://digital.ni.com/public.nsf/allkb/CF71091043A6193B862573D70077138B
|
Configuring the NI MES-3980 IP Address and Accessing the Web Console
I need to configure the NI MES-3980 for a static or dynamic IP address and then access the web browser to configure settings. How can I get this accomplished?
URL: http://digital.ni.com/public.nsf/allkb/5983CCB59977B3DC862573D0006156D6
|
FieldPoint OPC Server Update Rate
Problem: At what rate does the OPC Server for FieldPoint update? Solution: The update rate is 10 ms, and it cannot be changed. The figure below summarizes how an OPC Server communicates with a FieldPoint Controller.
URL: http://digital.ni.com/public.nsf/allkb/8DB8D79FF4AD0E85862573CB00772F6B
|
Unexpected Relay Behavior on [c]FP-RLY-42x Modules
When I write to one or more channels on a [c]FP-RLY-42x module, other channels on that module or adjacent modules exhibit unexpected behavior. Why is that?
URL: http://digital.ni.com/public.nsf/allkb/246152C8859CE715862573C60070728F
|
Can a cFP-CTR-502 Module Measure a 50KHz Signal?
I would like to sample a 50KHz signal with my cFP-CTR-502 module, but the internal frequency references are 1KHz and 32KHz.
URL: http://digital.ni.com/public.nsf/allkb/0C61D6B3FE540422862573AA007EB2C9
|
cFP-CTR-502模块可以测量50KHz信号吗？
我想要用cFP-CTR-502测量一个50KHz的信号，但是内部的参考时钟为1kHz与32Hz.这样可以吗？
URL: http://digital.ni.com/public.nsf/allkb/C7A829DAECBF859C862573D70046117E
|
Can My [c]FP 2xxx Controller Use a VISA TCP/IP Resource to Communicate With an LXI Instrument?
I am using a [c]FP 2xxx controller and I am trying to communicate with an LXI instrument. I am using the correct VISA TCP/IP Resource string, but I get error message Error -1073807343: Insufficient location
URL: http://digital.ni.com/public.nsf/allkb/0B0A92FEAE3D42A4862573A8001368E1
|
How Do I Use the Digital Input/Output Lines on my 7330, 7340, or 7350 Motion Controller Card?
How do I program the Digital Input/Output (DIO) lines on my NI 7330, 7340, or 7350 Motion Controller card?
URL: http://digital.ni.com/public.nsf/allkb/2D238C3BF101620C862573A60081BFFE
|
What is the Difference Between a Soft Reboot and a Hard Reboot on a Real-Time FieldPoint Controller?
What is the difference between a soft reboot and a hard reboot on a real-time FieldPoint controller?
URL: http://digital.ni.com/public.nsf/allkb/C268F401137B3D14862573A600771CB4
|
