Dual Channel RAM Performance for PXI Embedded Controllers
What is Dual Channel RAM? What do you need to take full advantage of Dual Channel RAM performance on National Instruments embedded controllers? What are the performance increase when using dual channel RAM?
URL: http://digital.ni.com/public.nsf/allkb/52896D53E3136246862573F400808F09
|
Why Do I Get Error -32812 When I Read or Write to a cFP-180x from a cFP-2xxx?
Why do I get Error -32812 when I read or write to a cFP-180x from a cFP-2xxx?
URL: http://digital.ni.com/public.nsf/allkb/80A4EF3A7A1784D6862573F4000B20C5
|
Different Types of Isolation: Channel-to-Channel, Bank (Channel-to-Bus), and Channel-to-Earth Ground Isolation
What are the differences between the types of electrical isolation NI offers on devices? I do not understand the differences between channel-to-channel, bank (channel-to-bus), and channel-to-earth ground isolation.
URL: http://digital.ni.com/public.nsf/allkb/CF71091043A6193B862573D70077138B
|
Configuring the NI MES-3980 IP Address and Accessing the Web Console
I need to configure the NI MES-3980 for a static or dynamic IP address and then access the web browser to configure settings. How can I get this accomplished?
URL: http://digital.ni.com/public.nsf/allkb/5983CCB59977B3DC862573D0006156D6
|
FieldPoint OPC Server Update Rate
Problem: At what rate does the OPC Server for FieldPoint update? Solution: The update rate is 10 ms, and it cannot be changed. The figure below summarizes how an OPC Server communicates with a FieldPoint Controller.
URL: http://digital.ni.com/public.nsf/allkb/8DB8D79FF4AD0E85862573CB00772F6B
|
Unexpected Relay Behavior on [c]FP-RLY-42x Modules
When I write to one or more channels on a [c]FP-RLY-42x module, other channels on that module or adjacent modules exhibit unexpected behavior. Why is that?
URL: http://digital.ni.com/public.nsf/allkb/246152C8859CE715862573C60070728F
|
Can a cFP-CTR-502 Module Measure a 50KHz Signal?
I would like to sample a 50KHz signal with my cFP-CTR-502 module, but the internal frequency references are 1KHz and 32KHz.
URL: http://digital.ni.com/public.nsf/allkb/0C61D6B3FE540422862573AA007EB2C9
|
cFP-CTR-502模块可以测量50KHz信号吗？
我想要用cFP-CTR-502测量一个50KHz的信号，但是内部的参考时钟为1kHz与32Hz.这样可以吗？
URL: http://digital.ni.com/public.nsf/allkb/C7A829DAECBF859C862573D70046117E
|
Can My [c]FP 2xxx Controller Use a VISA TCP/IP Resource to Communicate With an LXI Instrument?
I am using a [c]FP 2xxx controller and I am trying to communicate with an LXI instrument. I am using the correct VISA TCP/IP Resource string, but I get error message Error -1073807343: Insufficient location
URL: http://digital.ni.com/public.nsf/allkb/0B0A92FEAE3D42A4862573A8001368E1
|
How Do I Use the Digital Input/Output Lines on my 7330, 7340, or 7350 Motion Controller Card?
How do I program the Digital Input/Output (DIO) lines on my NI 7330, 7340, or 7350 Motion Controller card?
URL: http://digital.ni.com/public.nsf/allkb/2D238C3BF101620C862573A60081BFFE
|
