Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Comment mettre à l’échelle les voix issues d’un module FieldPoint sous LabVIEW ? J’acquière des données issues d’un module d’E/S FieldPoint (FP-AI-110). Je voudrai mettre à l’échelle les données que je reçois et créer une nouvelle unité de mesure. Est-ce possible sous MAX ? URL: http://digital.ni.com/public.nsf/allkb/1A902380953180C386257146002E049C

How Do I Adjust the Analog Input Rate of My FieldPoint Modules? Using the Measurement and Automation Explorer (MAX), I do not see how to set the sample rate for my Analog Input module. How can I program the sample rate? URL: http://digital.ni.com/public.nsf/allkb/3DCBB324D23FD637862571320066AA7A

What National Instruments Products Can Be Used for Current Output? Current Output is not directly supported by most of National Instruments' Multifunction DAQ devices. However, if the load is known then an appropriate voltage can be used to source up to 20 mA of current from an analog output channel. URL: http://digital.ni.com/public.nsf/allkb/4017793371AC28478625706800531CBE

전류 출력으로 사용할 수 있는 National Instruments 제품은 어떤 것이 있습니까? 전류 출력으로 사용할 수 있는 National Instruments 제품은 어떤 것이 있습니까? URL: http://digital.ni.com/public.nsf/allkb/354BE9472575EA80862570C900103483

How do I Set the TCR (Temperature Coefficient of Resistance, or alpha) for (c)FP-RTD-122's Channels? I am trying to set the correct TCR (Temperature Coefficient of Resistance, or alpha) for my RTD in the (c)FP-RTD-122. Where can I set this value? Is it set in hardware or software? URL: http://digital.ni.com/public.nsf/allkb/526E1E0F0BA0D5DA86257054005CFFFD

Compact FieldPoint cFP-TC-120 and cFP-CB-3 Product Notification Information As noted in our recent product notification letter, National Instruments recently discovered that revision B of the cFP-TC-120 may not meet performance specifications when operating in environments at the extreme ends of the operating temperature range. Furthermore, revisions A and B URL: http://digital.ni.com/public.nsf/allkb/0C86B0BD02BB1AC68625700E0074A04D

Receive error -33156 with a [c]FP-20xx and a [c]FP-AIO-6xx I am running a LabVIEW 7.1 VI targeted to my cFP-2020. The VI acquires data from the AI channels on a cFP-AIO-610 on my cFP bank and/or writes current values to AO channels on the same module. Intermittently I receive error -33156. Why does this happen and what is the solution? URL: http://digital.ni.com/public.nsf/allkb/98E8E44459F387C486256FF400815C33

[c]FP-TC-120 Electromagnetic Immunity When the [c]FP-TC-120 is exposed to electromagnetic fields sensors may have voltages induced by such fields thus causing erroneous data. URL: http://digital.ni.com/public.nsf/allkb/A8534BA8777F893B86256FD9006B3BD6

[c]FP-TC-120 전자기(Electromagnetic)노이즈에 대한 면역성 [c] FP-TC-120의 서모커플 센서가 전기/자기장에 노출이 되었을 때 그로인해 데이타의 값이 달라집니다. URL: http://digital.ni.com/public.nsf/allkb/F214012DA816EC4486256FF10021FF21

FP-RTD-12x와 cFP-RTD-12x의 온도 정확도 테이블의 에러에 대한 단위가 무엇입니까? FP-RTD-122, cFP-RTD-122 메뉴얼(April 2003)과 FP-RTD-124, cFP-RTD-124 메뉴얼(October 2002)의 11페이지에는 온도 정확도 표가 있습니다. 이 표는 에러의 단위가 명시되어 있지 않습니다. 무슨 단위입니까? URL: http://digital.ni.com/public.nsf/allkb/2C35F76E3F665CBD86256F66000A9B6A