Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Using Test and Measurement Explorer TM Explorer provides a graphical interface that allows you to view and configure the resources in your system. TM Explorer will let you configure VXI and VME devices, GPIB instruments, PXI devices, and serial and parallel instruments. URL: http://digital.ni.com/public.nsf/allkb/AE4EE6895FC48FB5862571E900465ECC

DAQ Board Installation in the Mac OS Click on "Run Test Panels" to perform simple input/output operations on various channels of your board. Note: When you write your code using application software and you get bad readings or unexpected values, always run the NI-DAQ Test Panels mentioned in the previous step. URL: http://digital.ni.com/public.nsf/allkb/6BD50A75D24EB992862571D8006735B2

DAQCard Installation under Windows NT Using the Native Windows NT Socket Driver How do I install my PCMCIA DAQ board on Windows NT using the Native Windows NT Socket Driver? URL: http://digital.ni.com/public.nsf/allkb/8B9D95BA239F6392862571D4004954C0

PCMCIA Installation in Windows NT These third party socket drivers overcome limitations of the standard Windows NT PCMCIA driver. For example the Windows NT socket driver (pcmcia.sys) does not provide dynamic resource allocation and "Hot Insertion" of PCMCIA cards. (Insertion while the PC is running). URL: http://digital.ni.com/public.nsf/allkb/AAA8C49749C56821862571D4004CE541

在Windows NT中安装PCMCIA 注意：所有的NI-DAQ 6.9.2之前的版本都是为本土化windows NT套接字驱动程序而写得。6.9.2版本已经被测试过了，并且支持与Card Wizard 5.10.x一起使用。 为了安装程序，请选择你将要使用的套接字驱动程序。 URL: http://digital.ni.com/public.nsf/allkb/ACF55D24C802EA66862573AC0031F9C9

PCMCIA Installation in Windows NT Using the Card Wizard 5.10.x Socket Driver How do I install a PCMCIA DAQ board in Windows NT using the Card Wizard 5.10.x Socket Driver? URL: http://digital.ni.com/public.nsf/allkb/1B390290BF0881CD862571D3006EF577

Non-Plug and Play Data Acquisition Board Installation in Windows NT I have a Non-Plug and Play DAQ board that I need to install in Windows NT. Are there step-by-step instructions for doing this? URL: http://digital.ni.com/public.nsf/allkb/604DBC2832599676862571D2006381D6

How Do I Remove References to National Instruments ISA Plug and Play Cards? I need to uninstall my ISA Plug and Play board. How do I completely remove all references to this board from my computer? URL: http://digital.ni.com/public.nsf/allkb/1A1C08AF08F23434862571CE0051A783

Installation Procedure for Non-Plug and Play Compatible DAQ Boards The next screen gives you the option to "Add/Troubleshoot a device" or "Unplug/Uninstall a device." Select the first option, "Add/Troubleshoot a device," and click on Next. Windows will present you with a list of devices present in the system. URL: http://digital.ni.com/public.nsf/allkb/640F135A673CC1BD862571CE00609A30

Available Hardware Resources under Windows NT I am having trouble with base address, interrupt request (IRQ) or direct memory access (DMA) conflicts in Windows NT. How can I check which resources are available? URL: http://digital.ni.com/public.nsf/allkb/1C3BA2820BFFCCFD862571CD0060DFFB