Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Time Drift With Synchronized DAQ-CAN Application I am trying to synchronize my CAN device to my DAQ device. However, after using an example program to synchronize them together I notice a time drift in DAQ-CAN application. What is causing the time drift and how can I correct this behavior? URL: http://digital.ni.com/public.nsf/allkb/B846715D4A0586BE86257115005A4AA9

用途別のUSBデータ集録デバイス (USB DAQ) 選定 USB接続のデータ収集デバイスを探していますが，どれがよいでしょうか。 URL: http://digital.ni.com/public.nsf/allkb/8BEE5C391B09557C86256FBF001F71C2

Application Developed with an E-Series DAQ Device gives Error -10007 when running with DAQCard-700 Why do I get Error -10007 when running an application with my DAQCard-700? The same program works fine with an E-Series DAQ device. URL: http://digital.ni.com/public.nsf/allkb/E766EBB1BF270BEE48256F7E006D2E58

Easy Way to Test if My DAQCard 700 is Working Properly I have a DAQCard 700, and I am not sure if it is working properly. What is an easy way to test it? URL: http://digital.ni.com/public.nsf/allkb/CF5D4B1F6C263A2C86256F7A00736B65

Parallel Port Does Not Appear in Measurement and Automation Explorer I am setting up my parallel port device (DAQPad-MIO-16XE-50, DAQPad 1200, or SCXI 1200) in Measurement and Automation Explorer (MAX), but when I try to choose a port all I can select is Not Assigned. I can see that my parallel port is enabled in Device Manager. How can I make URL: http://digital.ni.com/public.nsf/allkb/31DC65938A666A9A86256F56005B2624

Lab-PC+ Not Responding to Selected Base Address When I perform Test Resources on my Lab-PC+ in the Measurement and Automation Explorer, I receive the error 'This device is not responding to selected base address.' I have tried setting the dip switches for several different unused base addresses, tried the board in different slots, and another URL: http://digital.ni.com/public.nsf/allkb/34CE5C42FD8E520186256F4A0051BDA8

ELVIS 1.0 Returns “Requested Value is Not Supported Value For This Property” Error – Error # -200077 I have a DAQcard 700 and ELVIS 1.0. Whenever I start ELVIS 1.0, I get the error “Requested value is not supported value for this property” – error # -200077. What is causing this problem? URL: http://digital.ni.com/public.nsf/allkb/C4F82AF1E218F5AC86256F32005B5F70

ELVIS 1.0에서 '요청한 값은 지원되지 않습니다.-에러 # -200077'라는 에러가 발생합니다. DAQcard 700과 ELVIS 1.0을 사용하고 있는데, '요청한 값은 지원되지 않습니다.-에러 # -200077'라는 에러가 발생합니다. 이 에러의 원인은 무엇인가요? URL: http://digital.ni.com/public.nsf/allkb/C0C0E4A7F792D55086256FDB0014378C

E-シリーズデバイスのオンボード温度センサへのアクセス方法 E-シリーズのデータ集録デバイスのオンボード温度センサの値はどのようにして読み込むことができるのでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/0CA74FDCA847C22A86256F15004543A7

Why Does My AT/ISA DAQ Board Show Up As Two Devices Under Device Manager? When I go into Windows device manager, my MIO AT device shows up as two devices. Why is this happening and is this behavior correct? URL: http://digital.ni.com/public.nsf/allkb/BEA6B2841A42D22986256F10007F09CC