Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

在Windows NT中安装PCMCIA 注意：所有的NI-DAQ 6.9.2之前的版本都是为本土化windows NT套接字驱动程序而写得。6.9.2版本已经被测试过了，并且支持与Card Wizard 5.10.x一起使用。 为了安装程序，请选择你将要使用的套接字驱动程序。 URL: http://digital.ni.com/public.nsf/allkb/ACF55D24C802EA66862573AC0031F9C9

PCMCIA Installation in Windows NT Using the Card Wizard 5.10.x Socket Driver How do I install a PCMCIA DAQ board in Windows NT using the Card Wizard 5.10.x Socket Driver? URL: http://digital.ni.com/public.nsf/allkb/1B390290BF0881CD862571D3006EF577

Setting the Default Polling Rate in the NI-DAQmx I/O Server I want to change the default update rate for my NI-DAQmx I/O Server through an .ini file. But, I must subscribe to the server before I can update the rate. How can I set the default polling rate in the NI-DAQmx I/O Server? URL: http://digital.ni.com/public.nsf/allkb/7361077AEF2061D0862571BF000631EB

DAQPad-1200 (Parallel Port) Installation under Windows XP Enable interupts on the parallel port. Go to Start » Settings » Control Panel » System. Click the Hardware tab and then click on Device Manager. Once you are in the Device Manager, expand the Ports (COM & LPT). Right-click on your parallel port (Ex. LPT1) and select Properties. URL: http://digital.ni.com/public.nsf/allkb/EB1218BB014F7718862571A400753CC7

Parallel Port DAQ Device Installation under Windows NT Select your parallel DAQPad device from the list and click the Finish button. You will be asked to assign an LPT port to your DAQPad in the next window. URL: http://digital.ni.com/public.nsf/allkb/4F66915E37CBB516862571A4006D2571

Windows XP 에서 DAQPad-1200(Parallel Port) 설치 Windows XP 에서 DAQPad-1200(패러럴 포트)을 어떻게 설치합니까? URL: http://digital.ni.com/public.nsf/allkb/D0F02E2ED689AF42862571C60022A8DD

Parallel Port DAQ Device Installation under Windows 98/95/ME You may be asked, "Is the device you want to install listed below?" Select the option for "No, The device is not in the list" and click the Next button. (If you are not asked this question, then skip this step. URL: http://digital.ni.com/public.nsf/allkb/8214FAA4AF5DCB658625719C00726413

Windows 98/95/ME에서 패러럴 포트 DAQ 장비 설치 Windows 98/95/ME에서 패러럴 포트 DAQ 장비를 어떻게 설치합니까? URL: http://digital.ni.com/public.nsf/allkb/5A4C48EB37D2163C862571C6002BA9E0

Parallel Port DAQ Device Installation in Windows 2000 Go to Start » Settings » Control Panel » Add New Hardware. You will see a screen saying "Welcome to the Add/Remove Hardware Wizard." Click on "Next. URL: http://digital.ni.com/public.nsf/allkb/C3E02C0651A2BAFC8625719B006CE1AC

Windows 2000에서 패러럴 포트 DAQ 장비 설치 Windows 2000에서 패러럴 포트 DAQ 장비를 어떻게 설치합니까? URL: http://digital.ni.com/public.nsf/allkb/2B51CE24646E7589862571C600289BF0