Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Do I Install LabVIEW Real-Time 6.1.1 on my FieldPoint Controller I would like to install LabVIEW Real-Time 6.1.1 on my FieldPoint controller. How do I install this version of LabVIEW Real-Time from my host computer? URL: http://digital.ni.com/public.nsf/allkb/A80FB94C9C4FB401862573410064A073

Host 컴퓨터와 이더넷을 이용해 FieldPoint와 통신하기 FieldPoint 나 Compact FieldPoint 컨트롤러나 네트워크 모듈이 있는데 Measurement and Automation Explorer (MAX)상에서 보이지 않습니다. 어떻게 Host컴퓨터와 FieldPoint장치간 통신을 할 수가 있나요? URL: http://digital.ni.com/public.nsf/allkb/661431DCCED8C5A686257385002D9D21

How to Network FieldPoint to a Host Computer with Ethernet I have connected my FieldPoint or Compact FieldPoint controller or network module, but it does not appear in Measurement and Automation Explorer (MAX). How do I network my FieldPoint hardware to my host computer? URL: http://digital.ni.com/public.nsf/allkb/50BE7BEA4D5285DA862573370070D30B

Recovering a FieldPoint Configuration from the IAK File My FieldPoint system has lost its configuration, but I have a copy of the IAK file on my PC. Can I use this to recover my FieldPoint's configuration? URL: http://digital.ni.com/public.nsf/allkb/2EF82CA062692F4886257325008067BC

What Software Needs to be Installed to Activate the FieldPoint Recommended Software Sets in MAX? I have installed the August 2007 Driver CD or later, and I would like to use the recommended software sets for FieldPoint, but they are disabled. What software do I need to install to activate these recommended software sets? URL: http://digital.ni.com/public.nsf/allkb/B4394A1AE038A5FF8625731B005FE34F

In MAX, How Can I Link my [c]FP to a New IP Address? I have configured a compact FieldPoint system on my local subnet with plans to move it to another subnet. I save the Measurement & Automation Explorer (MAX) IAK file and import it on a computer on the new subnet with the [c]FP system. However, MAX now shows the system configuration on the URL: http://digital.ni.com/public.nsf/allkb/EED81C50334B8023862572E4004DC06F

In Measurement & Automation Explorer (MAX), how can I relink my [compact]FieldPoint system to a newer IP address? I have configured a [compact]FieldPoint system on my local subnet with plans to move it to another subnet. I save the MAX IAK file and import it on a computer on the new subnet with the [compact]FieldPoint system. However, MAX now shows the system configuration on the new subnet and an URL: http://digital.ni.com/public.nsf/allkb/B021C0871E628928862572E4004DCE82

[c]FP-RTD-124 Returns Noisy or Fluctuating Measurements Problem: Why does my [c]FP-RTD-124 return noisy or fluctuating measurements? Solution: National Instruments recently discovered that FieldPoint and Compact FieldPoint [c]FP-RTD-124 modules may take noisy or fluctuating measurements at power up. Often, measurements stabilize after several seconds. URL: http://digital.ni.com/public.nsf/allkb/3784655EFDDDE51E862572CF007A7D62

Why Do I Get Error 63 When Updating the Software on my FieldPoint? I am using the following software: LabVIEW Real-Time 6.X FieldPoint OS 9.X Why do I get error 63 when I attempt to update the OS or installed software? URL: http://digital.ni.com/public.nsf/allkb/80C1B751253C8F40862572CF000D36BE

如何增加FieldPoint或者cRIO RTD模块的范围？ 我有一个RTD，其电阻值超出了我的RTD模拟输入模块指定的测量范围。可否扩展最大阻值以使我的RTD能够测量？ URL: http://digital.ni.com/public.nsf/allkb/3437EF0534231DEC482572BA0012011F