Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Do I Adjust the Analog Input Rate of My FieldPoint Modules? Using the Measurement and Automation Explorer (MAX), I do not see how to set the sample rate for my Analog Input module. How can I program the sample rate? URL: http://digital.ni.com/public.nsf/allkb/3DCBB324D23FD637862571320066AA7A

cFP-AI-118のアナログ入力サンプリングレートの設定方法 MAX(Measurement and Automation Explorer )には、cFP-AI-118のアナログ入力サンプリングレートの設定項目がありません。cFP-AI-118のアナログ入力サンプリングレートはどのように設定するのですか？ URL: http://digital.ni.com/public.nsf/allkb/3557D65918D2F49386257170000ADBA4

LabVIEW에서 FieldPoint 채널들을 어떻게 스케일링 합니까? FP-AI-110 같은 Fieldpoint I/O 모듈로부터 데이터를 수집하고 있습니다. 현재 측정하고 있는 데이터를 측정되는 새로운 단위로 설정하는 스케일링을 하고 싶습니다. MAX에서 할수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/15E0A1072F31F7C68625713A0014B3B0

Why is the Scaling I Enabled in MAX Not Working on an Embedded Fieldpoint Application? I enabled scaling in Measurement & Automation Explorer under Data Neighborhood»FieldPoint Items»FP@xx_xx_xx_xx»cFP-xx-xxx»Channel 0 with the Scales Tab at the bottom. When I select the cFP Input Module under Data Neighborhood and click on Start, I see the scaling URL: http://digital.ni.com/public.nsf/allkb/5A1BEE79660CBBAB8625712D00766FE1

Why is the Scaling I Enabled in MAX Not Working on an Embedded FieldPoint Application? I enabled scaling in Measurement & Automation Explorer under Data Neighborhood»FieldPoint Items»FP@xx_xx_xx_xx»cFP-xx-xxx»Channel 0 with the Scales Tab at the bottom. When I select the cFP Input Module under Data Neighborhood and click on URL: http://digital.ni.com/public.nsf/allkb/5E09B32D9E5BA841862572C3007DB62E

Does the FP-TC-120 Module Have a Built-In Low Pass Filter? Does the FP-TC-120 module contain a low pass filter or is the filtering limited to the 50/60Hz notch filter specified in the manual? URL: http://digital.ni.com/public.nsf/allkb/9B50EEA8C43E461B8625707B00653B04

FP-TC-120 모듈이 Low Pass Filter를 내장하고 있습니까? FP-TC-120 모듈이 Low Pass Filter를 내장하고 있습니까? 아니면 메뉴얼에 명시되어 있는 50/60Hz notch filter로 한정되어 필터링 되는 것입니까? URL: http://digital.ni.com/public.nsf/allkb/73F3E75BA040A25B86257082001ACF5A

請問FP-TC-120模組有內建低通濾波器嗎? 請問在FP-TC-120的使用手冊中，是內建低通濾波器，還是50/60Hz的窄頻濾波器? URL: http://digital.ni.com/public.nsf/allkb/7D434E78F7A8E3D186257082000C1124

What National Instruments Products Can Be Used for Current Output? Current Output is not directly supported by most of National Instruments' Multifunction DAQ devices. However, if the load is known then an appropriate voltage can be used to source up to 20 mA of current from an analog output channel. URL: http://digital.ni.com/public.nsf/allkb/4017793371AC28478625706800531CBE

전류 출력으로 사용할 수 있는 National Instruments 제품은 어떤 것이 있습니까? 전류 출력으로 사용할 수 있는 National Instruments 제품은 어떤 것이 있습니까? URL: http://digital.ni.com/public.nsf/allkb/354BE9472575EA80862570C900103483