Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

用于热电偶测量的NI推荐硬件 NI Home This Document is not yet Rated Rate this Document 用于热电偶测量的NI推荐硬件 硬件: Multifunction DAQ (MIOE Series, Multifunction DAQ (MIOM Series, Multifunction DAQ (MIOPortable>>USB-9211A, SCXI>>Modules>>SCXI-1102, SCXI>>Terminal Blocks>>SCXI-1303, SCXI>>Modules>>SCXI-1112, SCXI>>Modules>>SCXI-1125, URL: http://digital.ni.com/public.nsf/allkb/5728F1E2C606756E4825724400233160

我可以使用我的FieldPoint系统测量AC信号？ 我希望使用我的FieldPoint系统测量AC信号。有没有是能做此人物的任何模块可利用？ URL: http://digital.ni.com/public.nsf/allkb/0755220A486BBB594825720A000FAB3D

Why Do I Get “Out Of Range” Status Message In MAX With My [c]FP-SG-140? I have set up my FieldPoint hardware correctly and I can see my configuration in the Measurement and Automation Explorer (MAX). If I click on [c]FP-SG-140, which shows up under the name of my FieldPoint controller in My System»Data Neighborhood»FieldPoint Items, I can see all channels URL: http://digital.ni.com/public.nsf/allkb/85CC44E5D41FCCFA862572080067A122

我没有插入我的热电欧模块，为什么我 FP-TC-120 上的 LED 灯没有亮？ 我将我的 FP-TC-120 插入我的控制器，并且连上了我的热电欧。但是空的通道的 LED 灯没有亮。为什么？ URL: http://digital.ni.com/public.nsf/allkb/A2B4563E0E31338D482571DA001F9419

Why Don't the LEDs On My FP-TC-120 Light Up When I Don't Have My Thermocouple Plugged In? I just plugged my FP-TC-120 into my controller and wired up my thermocouples. However the LEDs don't light up for the empty channels. Why? URL: http://digital.ni.com/public.nsf/allkb/4474AF17421892A7862571D500752D8A

当我从模块开我的RTD时，为什么我会得到“Out of Range” ？ 当我从我的FieldPoint模块上断开我的RTD时， 我得到“Out of Range”而不是“Open RTD'。 URL: http://digital.ni.com/public.nsf/allkb/0298453EE12A39C6482571D10012267A

LEDs on a [c]FP-TC-120 Do Not Light Up When a Thermocouple is Connected When I connect a thermocouple to my [c]FP-TC-120 module the red LEDs do not light up to show that the thermocouple is connected. How can I make the LEDs light up? URL: http://digital.ni.com/public.nsf/allkb/455675035067DE2A8625715D004F4B39

¿Por qué los LEDs de mi [c]FP-TC-120 no se Encienden Cuando un Termopar está Conectado? Cuando conecto un termopar a mi módulo [c]FP-TC-120, el LED rojo no se enciende para mostrar que el termopar está conectado. ¿Qué puedo hacer para que los LEDs se enciendan? URL: http://digital.ni.com/public.nsf/allkb/7DDAF7477D4AAF6C8625716F0030F39B

Measuring the 100Ω Resistance on [c]FieldPoint Current Input Modules When I try to measure the resistor between the current input and ground pins of my [c]FP-AI-1x0, I see infinite resistance. Why do I not see 100Ω like the documentation indicates? URL: http://digital.ni.com/public.nsf/allkb/E1E95CA712F06F6F8625714900469B67

[c]FieldPoint 전류 모듈의 100옴 저항을 측정하기. 제 [c]FP-AI-1x0의 전류 입력 핀과 접지 핀사이에 저항을 측정하려 할때, 무한대의 저항이 측정됩니다. 왜 사양서에 나와있는 것처럼 100옴의 저항을 볼 수 없는 것입니까? URL: http://digital.ni.com/public.nsf/allkb/984DFDEDBAB2D73D8625714D0006C137