Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

¿Cómo Puedo Detectar Módulos de Doble Canal en mi TB-10 en MAX? Tengo varios módulos de doble canal (dual channel modules) connectados al aparato TB-10. ¿Cómo puedo detectar estos módulos en Measurement and Automation Explorer (MAX)? URL: http://digital.ni.com/public.nsf/allkb/650374432386D47C86257097006098F1

How Do I Detect TB-10 Dual Channel Modules in MAX? NI Home This Document is not yet Rated Rate this Document How Do I Detect TB-10 Dual Channel Modules in MAX? Hardware: FieldPoint>>Dual-Channel Modules Problem: How do I detect my TB-10 dual channel modules in MAX? Solution: Follow the steps below to detect your TB-10 dual channel modules in MAX: URL: http://digital.ni.com/public.nsf/allkb/9E18096B6AF56C6B86256FF6005D1A1C

How Do I Detect TB-10 Dual Channel Modules in MAX? NI Home This Document is not yet Rated Rate this Document How Do I Detect TB-10 Dual Channel Modules in MAX? Hardware: FieldPoint>>Dual-Channel Modules Problem: How do I detect my TB-10 dual channel modules in MAX? Solution: Follow the steps below to detect your TB-10 dual channel modules in MAX: URL: http://digital.ni.com/public.nsf/allkb/BAA44089022F7FB78625732400760063

Why is My FieldPoint RTD-PT100-3 Module Indicating an Open RTD? I know my RTDs are not faulty, yet both channels of my RTD-PT100-3 are indicating an open RTD. URL: http://digital.ni.com/public.nsf/allkb/C8B423E1A4B7F39586256F6A006E787F

왜 Field Point RTD-PT100-3 모듈이 OPEN RTD 로 표시됩니까? 저의 RTD들은 문제가 없는것으로 알고 있으나 RTD-PT100-3의 채널 2개가 OPEN RTD로 표시되고 있습니다. URL: http://digital.ni.com/public.nsf/allkb/C103A82A4EC8E3F1862571CC000BCC37

¿Cuál es la Corriente de Carga de un módulo FP-DI-DC con canales duales? Tengo un FP-TB-10 y estoy usándolo con un FP-DI-DC. En el manual de usario del FP-TB-10, sale listado el rango de voltages aceptados por este módulo y las corrientes mínimas requeridas. Sin embargo, no sale listado la corriente de carga de este módulo. ¿En dónde puedo encontrar esta información? URL: http://digital.ni.com/public.nsf/allkb/9FB8B1832B663EB886256F1B007DEE81

Using Powered Voltage and Current Transducers with Dual Channel Modules Can I use voltage and current transducers that require excitation with my dual channel modules, and if so, can I use the FieldPoint controller's power supply to power these transducers? URL: http://digital.ni.com/public.nsf/allkb/A7AE5D013DB7DCA186256EA90066742B

What is the Load Current of the FP-DI-DC Dual Channel Module? I have a FP-TB-10 and am using it with the FP-DI-DC dual channel module. The user manual for the FP-TB-10 lists the voltage range for this module and the minimum current levels. It does not, however, mention the module's load current. Where can I find this information? URL: http://digital.ni.com/public.nsf/allkb/6B7739B21F1C29EE86256E440055B827

How Do I Use My FieldPoint Analog Input Dual Channel Modules in Differential Mode? The FP-TB-10 user manual states that I can use my Analog Input Dual Channel modules in differential mode. When I use DAQ products I have to configure this mode in Measurement and Automation Explorer. Do I need to perform any configuration for the FieldPoint Dual Channel Modules? URL: http://digital.ni.com/public.nsf/allkb/414BB889F5A6F1F286256DB900517696

FieldPoint Dual Channel Module관련 정보는 어디서 찾을수 있나요? FP-TB-10관련 스펙이나 배선을 볼수 있는 정보는 어디서 볼수 있나요? URL: http://digital.ni.com/public.nsf/allkb/9E2EC9E916F178F186256FE10019A147