Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What Are The Differences Between VME-GPIB and GPIB-1014? I am interested in purchasing an GPIB interface for the VME Bus and found that there are VME-GPIB and GPIB-1014 series, what are the differences between them and which one do I need? URL: http://digital.ni.com/public.nsf/allkb/705EA005018247148625705800705349

Which Driver Do I Use With the GPIB-1014 and VME-GPIB? I have a GPIB-1014 or VME-GPIB device. Is there a driver for these devices? URL: http://digital.ni.com/public.nsf/allkb/880C75400FEDEB7486256FC4006B094E

Cable Adaptor for Rear Connector on GPIB-1014 The product catalog lists that four versions of the GPIB-1014 board have a GPIB port in the rear of the device. How can I connect instruments to this rear connector? URL: http://digital.ni.com/public.nsf/allkb/6AFB2E1F55036EE086256C3A004DFCE9

対話式制御(ibic)で｢*idn?｣クエリをするとEABO(タイムアウト)エラーが発生します。 GPIBボードを構成し、トラブルシューティングウィザードも正常に終了します。対話式制御の使用ウェブページを元に通信を試みたところ、タイムアウトエラー「EABO」が発生します。入力したコマンドは以下の順 URL: http://digital.ni.com/public.nsf/allkb/862567530005F0A1862569A70017B715

The IBWRT '*IDN?' Command in IBIC Results in I have configured my GPIB board and it passes the Diagnostic test. I am following the communication example from the Interactive Control (IBIC) web page, but I get an during the ibwrt. The sequence of commands URL: http://digital.ni.com/public.nsf/allkb/D1D202AF57D08B5B862566570074A501

GPIB-1014 사용 후에 하드웨어 진단의 테스트 2 에서 테스트가 실패합니다. 왜 GPIB-1014 사용 후에 하드웨어 진단의 테스트 2 에서 테스트가 실패합니까? URL: http://digital.ni.com/public.nsf/allkb/6ABC43621CBA8FB28625720A000AEDB8

Test 2 of Hardware Diagnostics Fails After Using GPIB-1014 Why does Test 2 of the hardware diagnostics fails after the 1014 has been used? URL: http://digital.ni.com/public.nsf/allkb/C88BFDCF90D30971862564FB004773F0

488.2 Capabilities of GPIB-1014 for VME Problem: Is the GPIB-1014 488.2 compatible? Solution: The GPIB-1014 series of devices are IEEE 488 interfaces for the VME bus. Newer revisions of GPIB-1014 devices utilize the NAT7210 controller ASIC, which has 488.2 capabilities. URL: http://digital.ni.com/public.nsf/allkb/0972E8AF4ADB79F7862564DC004E7A05

What is the Difference Between the GPIB-1014, 1014D, 1014P and the 1014DP? What is the difference between the GPIB-1014, 1014D, 1014P and the 1014DP? URL: http://digital.ni.com/public.nsf/allkb/F61F7AC454D4F578862564960069BABA

GPIB-1014 Timing Problem with Sparc 10HS-66-32 Boards When I use revisions C or D of the GPIB-1014 VME controller to communicate with Sparc 10HS-66-32 VME cards, I don't seem to have any problems performing GPIB reads and writes. However, when I replace the GPIB-1014 card with a revision F or G, it has problems performing GPIB reads and writes. URL: http://digital.ni.com/public.nsf/allkb/A5093CFF8D31ADE485256428007A91E4