Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Transferring Vision Builder AI Inspections To or From a CVS I created a Vision Builder for Automated Inspection (VBAI) script on a Windows based PC. Now, I would like to upload this VBAI script to my Compact Vision System (CVS). I tried making a directory on my CVS to transfer my VBAI script via the File Transfer Protocol (FTP), but when I target the URL: http://digital.ni.com/public.nsf/allkb/35A8C01DB7CB8CD48625732700153E2B

Vision Builder AI检测与CVS的转换 我在windows下创建了一个Vision Builder for Automated Inspection (VBAI) 脚本。现在我想要上传该脚本到我的Compact Vision System (CVS)系统中。我在CVS中创建了一个目录，尝试通过File Transfer Protocol (FTP)传送我的VBAI脚本到CVS，但是当我使用VBAI来寻找CVS时，在打开的对话框找不到脚本 URL: http://digital.ni.com/public.nsf/allkb/F064ECF7C221F86D862574000016BA3A

將 VBAI 檢測檔案轉移到 CVS 或從 CVS 轉移到 PC 我在 Windows 的 PC 上建立了一個 VBAI 的程式(Script)，我想要將這個 VBAI script 上傳到 Compact Vision System(CVS)。我試著在 CVS 上產生一個資料夾並將 VBAI 程式由 FTP 傳送過去，但是當我用 VBAI 選擇 CVS 為目標(Target)時，我的程式(script)並沒有在對話窗中出現。我該如何將 VBAI ■> URL: http://digital.ni.com/public.nsf/allkb/2A0DBE90628C45EF8625738D003C2EA0

Why can I see my CVS in MAX but not in LabVIEW 8.0? I installed NI-IMAQdx and/or NI-IMAQ for IEEE 1394 cameras on my host computer. When I connect my CVS to the network, I can see it in MAX after refreshing. However, if I open LabVIEW and try to create a target, the option for searching for CVS units does not appear. How can I connect to my CVS from URL: http://digital.ni.com/public.nsf/allkb/6354A02D073C4EB38625730500504D1F

Programmatically Resetting the CVS-145x Problem: Can I reset my CVS-145x through software programmatically? Solution: No, there is no way to programmatically reset a CVS-145x. The closest option available is the Shutdown feature of the CVS. URL: http://digital.ni.com/public.nsf/allkb/DA1DA0265BC5EC55862572D60050085E

My Reformatted CVS is No Longer Found in My Remote Devices in MAX I reformatted my Compact Vision System (CVS) and now I can no longer find it under Remote Devices in Measurement and Automation Explorer (MAX). What do I do? URL: http://digital.ni.com/public.nsf/allkb/5B4E34342F0001FC862572D5001FA09F

What FPGA Chips are Used by National Instruments NI-IMAQ I/O Devices? All of the above FGPAs have a 40 MHz Onboard Clock. Specific information about these FPGA chips can be found on the Xilinx web site. Relevant information for the use of these NI devices can also be found in the manuals linked below. URL: http://digital.ni.com/public.nsf/allkb/99035781DCE3EBD58625724300546990

NI-IMAQ I/O有哪些新特性？ 相关链接: Drivers and Updates: Current Versions - Vision KnowledgeBase 3EKF86I3: What's New with NI Vision Software? URL: http://digital.ni.com/public.nsf/allkb/BF394DF90017D5874825723D000C8E29

Supplying Power to the CVS-1450 I/O Terminal Block and Prototyping Accessory I cannot get my CVS-1450 I/O Terminal Block and Prototyping Accessory to power up. My CVS is connected to power, and I've connected the 44-pin D-sub connector as shown in the instructions, but am still not getting power. How can I get power to the accessory? URL: http://digital.ni.com/public.nsf/allkb/94F7B3B464ED9A628625722E0061858B

能够同时在CVS上运行的VBAI和LabVIEW RT的版本号分别是什么？ 在我的紧凑型视觉系统（CVS）中，Vision Builder for Automated Inspection的版本号是2.6.1，LabVIEW Real-Time的版本号是7.1.1。我想把LabVIEW Real-Time升级为8.0，此时有如下错误“Cannot process install because other dependencies are required: LabVIEW Real-Time 7.1.1.”我想在CVS上安装Vision Build URL: http://digital.ni.com/public.nsf/allkb/57E0F7033E25645D4825721C004CF3BF