Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Unexpected Relay Behavior on [c]FP-RLY-42x Modules When I write to one or more channels on a [c]FP-RLY-42x module, other channels on that module or adjacent modules exhibit unexpected behavior. Why is that? URL: http://digital.ni.com/public.nsf/allkb/246152C8859CE715862573C60070728F

NI-Switch Error -1074118644 Occurs When DAQmx Name and VISA Alias Are the Same I have configured my DAQmx-supported NI switch such that the DAQmx name is the same as the device's VISA alias. When I attempt to initialize my switch with a valid topology using niSwitch Initialize with Topology VI or the niSwitch_InitWithTopology URL: http://digital.ni.com/public.nsf/allkb/5CAAAEF341B52D9C862573B70057B5FD

我在哪里可以找到 NI SWITCHES的管脚信息？ 我在参数规范（specifications）和安装向导中都找不到我的 NI Swithch设备的前面板管脚信息。. 这些信息可以在哪里查找呢？ URL: http://digital.ni.com/public.nsf/allkb/DC5600334B2ADB7748257393002A7024

The ; is Being Ignored When I am Externally Triggering a Scan List. on the SCXI-1127 ch0->com0 && URL: http://digital.ni.com/public.nsf/allkb/D1668945410AFAEE8625737900008709

Where Can I Find Pinout Information for NI Switches? I cannot find the front panel pinout information for my NI switch device in the specifications or the installation instructions. Where is this information found? URL: http://digital.ni.com/public.nsf/allkb/E9EAE82B81B7515A8625736800533CB6

¿Cuáles son los Requisitos de CPU para Utilizar mi Tarjeta de Serie M? He tratado de buscar en la Web pero no he encontrado ningún requisito de CPU para utilizar mi tarjeta de Serie M. ¿Cuáles son los requisitos de URL: http://digital.ni.com/public.nsf/allkb/D205178A4E45BF1F86257362001FC76B

Difference between Switch Resistance and Path Resistance in FET Switches I am using an NI Switch module with FET switches (such as the PXI-2501). I notice in the module's specifications document that the total path resistance is significantly larger than the FET switch on resistance. Why is the overall path resistance so much larger than the on resistance URL: http://digital.ni.com/public.nsf/allkb/B7000E91539ED72A86257336000D105E

Create Multiplexer and Matrix Configurations Using Single Pole Double Throw (SPDT) Switches I have a general purpose switch that only has Single Pole Double Throw (SPDT) configurations on it. Can I create a multiplexer or matrix topology from these switches? URL: http://digital.ni.com/public.nsf/allkb/8150F82883F430B5862572D400617CCA

26.5GHz Switch 모듈을 사용하고 있습니다. 26.5GHz 이하에서 동작하는 어플리케이션에 사용할 수 있습니까? 26.5GHz RF Switch를 이용해서 프로젝트를 진행해본적이 있습니다. 그리고 새 프로젝트를 진행하는데, 새롭게 적용하게 될 디바이스들을 최소한으로 줄이려고 합니다. 새 프로젝트에서는 26.5 GHz 신호보다 낮은 주파수의 신호를 사용하는데 해당 Switch를 그대로 적용■> URL: http://digital.ni.com/public.nsf/allkb/143D65FC86B8A559862572E30005F671

Can I Use a 26.5 GHz Switch for Applications Operating at Lower Frequencies? I have a 26.5 GHz RF switch that I had been using for a previous project and I would like to minimize the amount of new equipment I need for my new project. Can I simply use my 26.5 GHz switch for this application even though the frequency will not be anywhere near 26.5 GHz? URL: http://digital.ni.com/public.nsf/allkb/C902247C2F205F8F862572D200608F97