Simulation Models for the NI PXI-2593, PXI-2594 and PXI-2595
I would like to perform data analysis on S-parameter vs. frequency information for the PXI-2593, PXI-2594, and PXI-2595. Are there simulation models available for these RF Switch modules?
URL: http://digital.ni.com/public.nsf/allkb/CC13201D454A2761862571A90065D505
|
Etendre la configuration de la matrice du module PXI-2529
J'ai plusieurs PXI-2529, et je souhaite étendre ma matrice vers une configuration 4*64 ou 8*32. Comment puis-je réaliser cette extension ?
URL: http://digital.ni.com/public.nsf/allkb/12D96968EF9860898625713F003AD79F
|
Expanding to a Larger Matrix Configuration Using Multiple PXI-2529 Modules
I have multiple PXI-2529 modules and I want to expand to a larger matrix for a 4x64 or 8x32 configuration. How can this be accomplished?
URL: http://digital.ni.com/public.nsf/allkb/B24D4FA9F3C84A758625713A00624DE9
|
다수의 PXI-2529 모듈로 매트릭스 확장하기
저는 여러개의 PXI-2529 모듈을 가지고 있습니다. 그리고 4x64나 8x32의 보다 큰 매트릭스 환경을 꾸미고 싶습니다. 어떻게 하면 되나요?
URL: http://digital.ni.com/public.nsf/allkb/751447448D6F62E0862571410019E127
|
Can DMM/Switch Handshaking be done through the PXI Backplane when Using the SCXI-1127/1128?
I have a PXI combo chassis in which I would like to perform handshaking between my PXI-407x and the SCXI-1127/1128. Can I route the handshaking lines through the PXI backplane so that no external trigger lines need to be run? If so what trigger lines should I select in the niSwitch DMM Switch
URL: http://digital.ni.com/public.nsf/allkb/37AF180CA4097DFB86256FF100513FB7
|
1-와이어 듀얼 64X1 모드로 설정했을 때 TB-2630의 핀아웃이 어떻게 됩니까?
NI Switch 도움말에 보면 TB-2630 터미널 블럭을 2530 스위치와 사용하면 1-와이어 듀얼 64X1 모드로 사용 할 수 있다고 되어 있습니다. 그러나 TB-2603 설치 가이드를 보면 1-와이어 128X1, 2-와이어 64X1, 4-와이어 32X1모드에 대한 핀아웃만 나와 있습니다.
URL: http://digital.ni.com/public.nsf/allkb/205FA950EEEEBD2786257003000EDD8F
|
What is the Pinout for the TB-2630 when Configured for 1-Wire Dual 64x1 Topology?
The NI Switches Help documentation states that the TB-2630 terminal block should be used for the 1-Wire Dual 64x1 topology when using the 2530 switch. After reviewing the TB-2630 installation guide, there are only pinouts available for the 1-Wire 128x1, 2-Wire 64x1, and 4-Wire 32x1 topologies.
URL: http://digital.ni.com/public.nsf/allkb/A8DE0B77EE6623B486256FE8005EDE80
|
Why Am I Getting a 'No Explicit Path Found Between the Two Channels' Error?
I initially wrote a program to connect two channels in the SCXI module in matrix mode. During the testing phase, the connectivity of the route created was checked and the path was indeed created. However when I write another program to disconnect the channels I get an error that no explicit
URL: http://digital.ni.com/public.nsf/allkb/3C291003766C61A086256FE40048BC8D
|
Using a Custom Terminal Block or Cable with a SCXI 1127/1128 Switch Module
I'm using an SCXI 1127/1128 with a custom terminal block or cable instead of the 1331 terminal block. Why am I not able to route signals through the switch?
URL: http://digital.ni.com/public.nsf/allkb/75C1687A6ECD635786256FC100005C8A
|
Pinouts for Matrix, Multiplexer, and Independent Switch Modules
I am looking for the pinout diagrams for a specific switch module. I would like to know what pins correspond to certain channels and if the switch module can support more than one topology. Where can I find this information?
URL: http://digital.ni.com/public.nsf/allkb/7BCCF6B21EC4E0F086256F41007895FC
|
