Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why does the Auto-Detect Fail to Recognize my SCXI-1163R? I am controlling a SCXI chassis with an M-Series DAQ device. Currently I have the chassis properly configured in MAX with the appropriate communicating device selected and it auto-detects and recognizes all modules except my SCXI 1163R. I have ensured that all the jumpers are in their URL: http://digital.ni.com/public.nsf/allkb/ED9E094B7996D4A58625743300606C56

Get Relay Count for Unlimited Mechanical Life Relays If the new FET (PXI 2533/2534) and SSR (PXI 2535/2536) switch modules state that they have unlimited relay life, what is the meaning of the Get Relay Count value? URL: http://digital.ni.com/public.nsf/allkb/29B855397420232B862574320078D9E7

Signal Connections for TB-2606 Terminal Block Where can I find the signal connections or a diagram of the terminals for the TB-2606 terminal block? URL: http://digital.ni.com/public.nsf/allkb/351180C195A77DED8625740800506462

NI PXI-2535 or PXI-2536 FET Switch Doesn't Close I am using an NI switch module with fault protected FET switches (e.g. PXI-2535 or PXI-2536). The module typically works as it should, but sometimes I notice that the signal path reads open even after a command is sent to close the switch. I've noted this can happen when using the fault prote URL: http://digital.ni.com/public.nsf/allkb/FD603AF66DCC934386257403006C4109

LFH200 Bare Wire Cables with Date Codes 3707 and 5007 Have Incorrect Pinouts On the LFH200 Bare Wire cable, Leg J2, Leg J3, Leg J6 and Leg J7 have mismatched wire color codes when compared with the pin assignment table given in the LFH200 Cable Installation Instructions. This URL: http://digital.ni.com/public.nsf/allkb/F6C3FFFAC2A65970862573E7007F822E

The ; is Being Ignored When I am Externally Triggering a Scan List. on the SCXI-1127 ch0->com0 && URL: http://digital.ni.com/public.nsf/allkb/D1668945410AFAEE8625737900008709

26.5GHz Switch 모듈을 사용하고 있습니다. 26.5GHz 이하에서 동작하는 어플리케이션에 사용할 수 있습니까? 26.5GHz RF Switch를 이용해서 프로젝트를 진행해본적이 있습니다. 그리고 새 프로젝트를 진행하는데, 새롭게 적용하게 될 디바이스들을 최소한으로 줄이려고 합니다. 새 프로젝트에서는 26.5 GHz 신호보다 낮은 주파수의 신호를 사용하는데 해당 Switch를 그대로 적용■> URL: http://digital.ni.com/public.nsf/allkb/143D65FC86B8A559862572E30005F671

Can I Use a 26.5 GHz Switch for Applications Operating at Lower Frequencies? I have a 26.5 GHz RF switch that I had been using for a previous project and I would like to minimize the amount of new equipment I need for my new project. Can I simply use my 26.5 GHz switch for this application even though the frequency will not be anywhere near 26.5 GHz? URL: http://digital.ni.com/public.nsf/allkb/C902247C2F205F8F862572D200608F97

What Happens When I Hardwire and Mutually Exclude the Same Connection in Switch Executive? I have two multiplexers which I want to combine together to create a larger multiplexer in Switch Executive. I want to ensure that all the channels from one multiplexer are mutually excluded from the others. I created a hardwire connection between the COMs. I also placed the COMs in mutual URL: http://digital.ni.com/public.nsf/allkb/3C95125F1CB59D9C8625726F00262A49

PXI-2585 and PXI-2586 Pin-outs NI Home 1 rating: 1 out of 5 Rate this Document PXI-2585 and PXI-2586 Pin-outs Hardware: Switches>>Multiplexer/Matrix>>PXI-2586, Switches>>Multiplexer/Matrix>>PXI-2585 Problem: What are the pin-outs for the PXI-2585 and PXI-2586? Solution: PXI-2585: PXI-2586: Related Links: Product Manuals: NI URL: http://digital.ni.com/public.nsf/allkb/AE2F40DAB330CCB886257244000CFB39