Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

캘리브레이션 과정을 수행하는 중에 Calibration Executive 3.0에서 에러 -18002를 출력합니다. 최근에 Calibration Executive 3.0을 설치하였습니다. Cal Exec 어플리케이션은 정확하게 동작됩니다. 그러나 캘리브레이션 과정을 실행하려고 하면 항상 에러코드 -18002, 'The VI is not executable.'가 발생합니다. 이 에러를 제거하는 방법이 무엇입니까? URL: http://digital.ni.com/public.nsf/allkb/D7B51C2D3FA417CF8625703B0021BF62

Error -1074135024 en el Procedimiento de 'Calibration Executive' para el Instrumento Agilent 3325B Cuando estoy ejecutando el procedimiento para calibrar la tarjeta NI 4472 DSA en 'Calibration Executive' obtengo el error -1074135024, esto en el paso que concierne al instrumento Agilent 3325. URL: http://digital.ni.com/public.nsf/allkb/776C879131DF856C86256FB700751B0D

Unknown Interface Error Calibrating FP-TC-120 with Calibration Executive I am trying to calibrate my FP-TC-120 using Calibration Executive 2.2.1 in Windows XP. Why do I receive the following error message: UNKNOWN interface error occurred at: Step: 'Adjust' In Sequence: 'Adjust' Specific Error Information: Error Code: -34123 Error Message: UNKNOWN ERROR? URL: http://digital.ni.com/public.nsf/allkb/A9175F53A45C360E86256F9B00231095

Why Do I Get Error -1074130425: 'Item Does Not Exist in the Collection' When I Try to Run Calibration Executive? Why do I get Error -1074130425: "Item Does Not Exist in the Collection" when I try to run Calibration Executive? URL: http://digital.ni.com/public.nsf/allkb/F8B99894A4259AFE86256F6B00768286

Baud Rate Settings When Calibrating an FP-TC-120 with Calibration Executive What baud rate should I set on my FieldPoint controller in order to calibrate my FP-TC-120? URL: http://digital.ni.com/public.nsf/allkb/8F0CB5E601E4D90B86256F3500673843

Calibrating FieldPoint Modules Using a FieldPoint 2000 with Calibration Executive Can I calibrate my FieldPoint modules using a FieldPoint 2000 (FP-2000) controller and calibration executive? URL: http://digital.ni.com/public.nsf/allkb/C8B6E49ED7A5D8FE86256F26005D6C2E

Calibration Executive 2.2 -- Important Notes Not In Documentation Are there any notes or important information that are not included in the Calibration Executive 2.2 Documentation that I should know of? URL: http://digital.ni.com/public.nsf/allkb/4A741B9536A32D6586256F0B005F4B4B

Error -10635 when Running SCXI-1520 Calibration Executive Procedure with SCXI-1001 Chassis The following error occurs when running the SCXI-1520 Calibration Executive Procedure with an SCXI-1001 Chassis.Error -10635, Error Message: invalid SCXIOpModeError: Either the SCXI operating mode specified in a configuration call is invalid, or a module is in the wrong operating mode URL: http://digital.ni.com/public.nsf/allkb/863A7527267B772B86256F0400532E92

Error -1074135024 In Calibration Executive Procedure For Agilent 3325B I get Error Code -1074135024 in Calibration Executive when I'm running the procedure for the NI 4472 DSA device. At the step regarding the Agilent 3325, it gives the error message shown below. URL: http://digital.ni.com/public.nsf/allkb/E03677C1B01816ED86256EED0065D27A

Error 2147352573 with Calibration Executive 2.0 on Windows 2000 or ME Why do I get Error Code 2147352573 when I try to run Calibration Executive 2.0 on Windows 2000 or ME? URL: http://digital.ni.com/public.nsf/allkb/3F0C69566B03F74386256EE4005B225E