Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Error -17208 When Using SCXI-1104 with Calibration Executive 3.2 Error -17208 is returned when calibrating an SCXI-1104 with Calibration Executive 3.2. URL: http://digital.ni.com/public.nsf/allkb/2FC4059D33FEF318862572BB0043704C

Why Is My SCXI Module Not Selectable In Calibration Executive? I am trying to calibrate an SCXI module in Calibration Executive. I have configured the Calibration Procedure in the setup wizard, and when I try to choose the module while setting up the Device Identifier, I cannot select it in the drop-down box. I have set up my DAQ card and SCXI chassis in MAX. URL: http://digital.ni.com/public.nsf/allkb/D98BF27357A11BEE862570E50061EF98

Error -10635 when Running SCXI-1520 Calibration Executive Procedure with SCXI-1001 Chassis The following error occurs when running the SCXI-1520 Calibration Executive Procedure with an SCXI-1001 Chassis.Error -10635, Error Message: invalid SCXIOpModeError: Either the SCXI operating mode specified in a configuration call is invalid, or a module is in the wrong operating mode URL: http://digital.ni.com/public.nsf/allkb/863A7527267B772B86256F0400532E92

Does Calibration Executive Support the SCXI-1102B, SCXI-1102C, SCXI-1104C, or SCXI-1120D? In numerous locations that list the SCXI modules supported by Calibration Executive, the SCXI-1102, SCXI-1104, and SCXI-1120 are included, but the B, C, and D variations of these modules are not. Are these SCXI modules supported by Calibration Executive? URL: http://digital.ni.com/public.nsf/allkb/F7313C35709D3C1986256E5A0069C8A0

Can I Calibrate SCXI Modules Using PXI/SCXI Combo Chassis? Is it possible to calibrate SCXI modules using the PXI/SCXI combo chassis, such as the PXI-1010 and the PXI-1011? URL: http://digital.ni.com/public.nsf/allkb/EC8FB0043ADA712586256D1700697986