Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Calibration Executive Report Shows Failure for NI 4060 when Software Indicates Passing When I run a "verify only" on a 4060 it will show as a green PASS but in the report, it does not meet the "as Left" data (which are 24hr specifications) and thus will show FAILED. URL: http://digital.ni.com/public.nsf/allkb/F099D251EAFA73DE862573AE000A6F1C

Why Do I Get an Input Impedance of 750K Ohms When Calibrating a PXI-5112? I am using a Datron/Wavetek 1281 (the 1281 is a 8.5 digit DMM) to measure the input impedance of a PXI-5112 with Calibration Executive. I expect to get an input impedance reading of 1MΩ on all ranges: 40V, 4V, and 0.4V.The problem is when I run the test, I get an input impedance of 1MΩ on URL: http://digital.ni.com/public.nsf/allkb/DC13A3548760A67A86256EE0002DA554

为什么当在标定PXI-5112时，它的输入阻抗是750K欧姆？ 我使用Datron/Wavetek 1281 (1281是一个8.5位的数字万用表）测量PXI-5112的输入阻抗（用标定执行器）。我应该在40V,4V,0.4V所有这些量程上都得到1M欧姆的输入阻抗。问题是，当我运行这个测试时，在40V和4V量程上得到1M输入阻抗。但在0.4V量程上得到750K欧姆。 URL: http://digital.ni.com/public.nsf/allkb/35A860493D953D2E86256F090022EE81

Why does the Analog Input Frequency Test fail in the DSA Calibration Executive Procedure? When I calibrate the DSA board with Calibration Executive, the board fails the Analog Input Frequency Accuracy Test. All the other tests pass. URL: http://digital.ni.com/public.nsf/allkb/8D612DE00050B39886256BFF00608E45

为什么在DSA的校准执行过程中，模拟输入频率测试失败？ 当我校准我的DSA板卡时，板卡的模拟输入频率精度测试失败，其他的测试都通过了，为什么？ URL: http://digital.ni.com/public.nsf/allkb/4C675F3829A7CA718625735C00066FDB

Error 10401 Running NI 4350/4351 Calibration Procedure in Calibration Executive. When running the NI 4350/4351 Calibration Procedure 1.0 with NI-DAQ 6.8.1, I get error 10401. What is causing this? URL: http://digital.ni.com/public.nsf/allkb/3E912AA203B8033E86256AE3005086A3