Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Error-17338 When Closing Calibration Executive 3.3 Error -17338 occurs when closing Calibration Executive after a Calibration procedure when LV 8.6 RTE is also installed with Calibration Executive 3.3. How can I get rid of this error? URL: http://digital.ni.com/public.nsf/allkb/F5904B57C9AA6B6C862575CC0057DD08

NI-5600 or NI-5610 Calibration Fails I use Calibration Executive 3.3.1 to calibrate a PXI-5600 or a PXI-5610 that should pass but the device fails the calibration. Or, I have noticed that the limits in Calibration Executive do not seem to match the specifications. Why is this and how can I fix it? URL: http://digital.ni.com/public.nsf/allkb/03447DD5031B3C02862575BC005F3422

Why Can't I Perform a Complete Calibration with Exceptions on an NI 4070/4072 in Calibration Executive? The NI 4070/4072 6½-Digit FlexDMM Calibration Procedure states that I can perform a complete calibration with exceptions; however, when I uncheck all the boxes for a particular measurement type (AC Voltage for example) the continue button is grayed out. Why is this happening? URL: http://digital.ni.com/public.nsf/allkb/2F61F43A9189E02B862575B8000467F5

Why Does My PXI-4110 Fail Current Output Calibration My PXI-4110 DC Power Supply is failing the Ch 0 Current Output 1A test portion of the 4110 calibration procedure. I am using a DMM that meets the requirements of the calibration procedure, but not the PXI-4071. What is causing this and how can I fix it? URL: http://digital.ni.com/public.nsf/allkb/D2A7791B25293BC58625759A00692906

¿Es Posible Calibrar un PXI-6552 Con Calibration Executive Utilizando un Osciloscopio Tektronix 3045C? Necesito calibrar una tarjeta PXI-6552 con Calibration Executive 3.3, el procedimiento de calibración recomienda utilizar un osciloscopio Tektronix TDS 3054. Por otro lado, este modelo está obsoleto, el modelo actual es Tektronix 3054C.Sin embargo, en Calibration Executive no se encuetra listado URL: http://digital.ni.com/public.nsf/allkb/918D19AC71B2A8BE862575AE006467B4

How Are The B/E/M/S Calibration Procedure Values Calculated? I am looking at the B/E/M/S Series Calibration Procedure for NI-DAQmx document and the Upper Limit and Lower Limit values do not seem to match the Accuracy Information from the Detailed Specifications for the actual DAQ device. Which document is correct? URL: http://digital.ni.com/public.nsf/allkb/3A7F40A191C371C28625758C0056B401

Optimizing Properties for DIAdem DataFinder Search When I do an advanced search in my DataFinder I can click on the ... button on the far right to get a list of values for the basic properties. How can I get make that list of values available for my custom properties? URL: http://digital.ni.com/public.nsf/allkb/6C168D663DADF7BD86257537006D3694

Can I Run LabVIEW VIs with the LabVIEW Run-Time Engine? I have the LabVIEW run-time engine installed on my machine, is it possible to run LabVIEW VIs with this? URL: http://digital.ni.com/public.nsf/allkb/7C698C160C12A8118625752F007EFD59

Calibration Executive NI 5600 Read Data File Missing I am using Calibration Executive to calibrate a NI 5600. During the calibration process a error message is received:Calibration Procedure ErrorOpen File in CalExec_5600_Read Data.VILabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted URL: http://digital.ni.com/public.nsf/allkb/2F29C0AEA6BF33C8862573D3006E5197

Calibration Executive is giving Error -1074001424 When Calibrating a PCMCIA-4050 Why am I receiving error -1074001424 trying to calibrate my PCMCIA-4050 with Calibration Executive? URL: http://digital.ni.com/public.nsf/allkb/4D4E9D5DE63C562D862573BE005D98CC