Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Do I Grant Exception to the Network License Server in the Windows Firewall? I installed the Network License Server (NLS) and I get message: Connection to the license server failed. I am advised to give exceptions to the NLS and to the TCP Port indicated in the NLS. URL: http://digital.ni.com/public.nsf/allkb/1ED18A692312BFD286257236006DF21F

How can I query the Network License Server from an external application? I want to build an application that monitors the licenses that the Network License Server (NLS) is giving out to users so I can know which computers are running any of the available seats of Multisim or Ultiboard. URL: http://digital.ni.com/public.nsf/allkb/66D3247292758CD08625723600509209

Network License Server를 사용하기 위하여 Windows Firewall의 통신 설정을 어떻게 해주어야 합니까? Network License Server(NLS)를 설치한후에 다음과 같은 메세지가 나타났습니다. 'Connection to the license server failed' NLS와 NLS에 명시된 TCP포트에대한 제한을 풀어줘야 하는데 어떻게 할 수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/17BF80BDA673E2678625723B001941B8

What is the EWB_layout Field in Multisim? I have noticed that when the Select a Footprint dialog box is open, there is an EWB_layout column. What is it used for? Why is there a footprint listed in the Footprint column different from the one listed in the URL: http://digital.ni.com/public.nsf/allkb/A237B63FD0BD440886257236005A6ED4

Multisim crashes when using the Breadboard. When trying to use the Multisim Breadboard, the application crashes with an access violation. The crash may occur when the breadboard is opened, when clicking to start placing a wire, or when dragging to place the second end of a wire. While dragging, prior to the crash, the wire may not follow the URL: http://digital.ni.com/public.nsf/allkb/D5B0402C2B42A07A862572330050F7D0

Multisim 9 or Ultiboard 9 installer gives error: 'Object Reference Not Set'. I am installing Multisim 9 or Ultiboard 9 and the installer crashes with the following error message (see picture attached): ------------------------------------------------------------- Error Number: 0x80040706 Description: Object Reference Not Set Setup will now URL: http://digital.ni.com/public.nsf/allkb/2394F911602EF9CC862572300056BAD5

Multisim 9 또는 Ultiboard 9 인스톨러가 다음과 같은 에러를 발생합니다.: 'Object Reference Not Set'. Multisim 9 또는 Ultiboard 9 을 설치하는데 인스톨러가 다음과 같은 에러 메세지를 발생하며 충돌이 납니다.(아래 첨부된 그림참조): ------------------------------------------------------------- Error Number: 0x80040706 Description: Object Reference Not Set Setup will now terminate -- URL: http://digital.ni.com/public.nsf/allkb/BF63B2755CB147B586257236002D3F98

Adding 3D Information to a Footprint The instructions described here assume that you already created a footprint and now you want to add 3D data to it. You can use the same process if you wish to modify existing 3D data as well. URL: http://digital.ni.com/public.nsf/allkb/33AED2BAFE45ABEF8625722E0072CBFD

Error: 'Connection to the license server failed' When I Start Multisim or Ultiboard When I try to launch Multisim or Ultiboard I get a message saying: Connection to the license server failed. I have my installation setup as a Network-type installation. URL: http://digital.ni.com/public.nsf/allkb/CE54342D0EF82E2E8625722E0066650D

How Do I Add or Modify the Soldermask in Ultiboard? I want to add or modify sections of the soldermask in my Printed Circuit Board (PCB). How do I do this? URL: http://digital.ni.com/public.nsf/allkb/4BCA9F2D8810C34A8625722E00763F9A