Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Do I Get Error -1074118644 Using an NI Switch? When I configure an NI switch I get the following error: Error -1074118644 occured at niSwitch Initialized With Topology.viNo legacy device URL: http://digital.ni.com/public.nsf/allkb/8BAC537C339309C58625746E00703C08

Why Do I Get an Error in MAX After Downgrading From LabVIEW Real-Time 8.6 to 8.5? After downgrading from LabVIEW Real-Time 8.6 and Network Variable Engine 1.5.0 to LabVIEW Real-Time 8.5 and Network Variable Engine 1.4.0, I get one of the following messages in Measurement & Automation Explorer (MAX) when I try to expand Remote Systems >> URL: http://digital.ni.com/public.nsf/allkb/679050D7A24AAF448625746D004FE902

为什么当我从LabVIEW Real-Time 8.6降级到8.5的时候，MAX会出现错误？ 当我从LabVIEW Real-Time 8.6 和 Network Variable Engine 1.5.0 降级到 LabVIEW Real-Time 8.5 和 Network Variable Engine 1.4.0，在Measurement & Automation Explorer (MAX)中展开Remote Systems »Software会出现下面的某个错误: URL: http://digital.ni.com/public.nsf/allkb/F4A3551EAABFD59D862574B600538AD2

How to Set Input Range When I Use an SCXI 1120 with a TBX 1327 Terminal Block I have an SCXI 1120 module, and I want to acquire signal whose range is greater than 5 V. That's why I'm using a terminal block (a TBX 1327), but I don't know how to configure gain and attenuation. URL: http://digital.ni.com/public.nsf/allkb/32802A102D2D5D238625746600471DFA

How to Reassign DAQmx Tasks to a Different DAQ Device I have purchased a new DAQ device to use with an existing data acquisition program. I would like to delete my old DAQ device in Measurement & Automation Explorer, but would like to keep the DAQmx tasks that were associated with my old DAQ device, and associate these tasks with my new DAQ URL: http://digital.ni.com/public.nsf/allkb/9117075591E54E868625745D0053DCCA

如何将DAQmx任务重新分配给另外一个DAQ设备 我购买了一个新的DAQ设备，并准备使用现有的数据采集程序。我准备在MAX中将原有的DAQ设备删除，但想保留那些与旧设备相关联的DAQmx任务，并将这些任务与我的新设备关联。我该如何将DAQmx任务重新分配给新的DAQ设备？ URL: http://digital.ni.com/public.nsf/allkb/5917733A34F46FAA862574D1005014E3

What Version of MAX Is Installed with NI-IMAQ? I would like to know which version of Measurement & Automation Explorer (MAX) is installed with NI-IMAQ. URL: http://digital.ni.com/public.nsf/allkb/D468C851DDE039EF8625743D006E0455

What Version of MAX Is Installed with NI-VISA? I would like to know which version of Measurement & Automation Explorer (MAX) is installed with my NI-VISA driver. URL: http://digital.ni.com/public.nsf/allkb/4F3DB9D8815CA7908625743D0066800D

在安装NI-VISA时附带安装的MAX是什么版本？ 我想知道在安装NI-VISA时附带安装的MAX是什么版本？ URL: http://digital.ni.com/public.nsf/allkb/294330EEAAF5259D862574D100269964

Why Do I Get an Error in Measurement & Automation Explorer After Windows Vista Resumes? Why do I get an error in Measurement & Automation Explorer (MAX) after Windows Vista resumes from sleep or hibernation? URL: http://digital.ni.com/public.nsf/allkb/8A84AAEB307D01158625742D007A8055