Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

PCI 6703/6704 Devices Appear Under Traditional DAQ Devices But Not Under NI-DAQmx Devices in MAX I have installed both the Traditional and DAQmx drivers and I can see my PCI 6703/6704 in MAX under Traditional NI DAQ Devices, but I do not see it under DAQmx Devices. Why is this? URL: http://digital.ni.com/public.nsf/allkb/002F195619F28C458625710E0058DB0C

My PCI-6704 Fails the Self-Test in MAX When I Attempt to Open a Test Panel When I try to open a traditional test panel in MAX v3.1 for my PCI-6704 it notifies me that my device has failed the self-test, but will proceed to open a test panel. I also have an MIO card in my system which give the same error as well. I don't notice any other odd behavior though and both seem URL: http://digital.ni.com/public.nsf/allkb/3E5773BC3F429EC886256F0A006FFCF0

BNC-2110の端子台を671xと673x型のアナログ出力デバイスと組み合わせて使用することに関して。 671xあるいは673x型のアナログ出力デバイスにBNC-2110端子台を使用したい場合、Measurement & Automation Explorer (MAX)の設定画面で、BNC-2110はアクセサリの一覧に出てきません。どうしたらよいでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/5227C69E6521E7FF862570DC001F190D

Using the BNC-2110 with 671x and 673x Analog Output Devices When I try to configure my 671x or 673x analog output device to use the BNC-2110 as an accessory, Measurement & Automation Explorer (MAX) does not list the BNC-2110 as an option. What should I do? URL: http://digital.ni.com/public.nsf/allkb/5E5DFEF10C256A1A86256D7F0063CD92