Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Do I Receive VISA Error 0xBFFF00A7 and NI-RIO Error -63040 Under My CompactRIO Controller in MAX? I’ve connected my CompactRIO target to my network. However, when I look under remote systems in Measurement and Automation Explorer (MAX) on my host PC, I can see the controller, but under Devices and Interfaces I see both VISA error URL: http://digital.ni.com/public.nsf/allkb/5BBA8F279C449E828625739300040621

Host 컴퓨터와 이더넷을 이용해 FieldPoint와 통신하기 FieldPoint 나 Compact FieldPoint 컨트롤러나 네트워크 모듈이 있는데 Measurement and Automation Explorer (MAX)상에서 보이지 않습니다. 어떻게 Host컴퓨터와 FieldPoint장치간 통신을 할 수가 있나요? URL: http://digital.ni.com/public.nsf/allkb/661431DCCED8C5A686257385002D9D21

How to Network FieldPoint to a Host Computer with Ethernet I have connected my FieldPoint or Compact FieldPoint controller or network module, but it does not appear in Measurement and Automation Explorer (MAX). How do I network my FieldPoint hardware to my host computer? URL: http://digital.ni.com/public.nsf/allkb/50BE7BEA4D5285DA862573370070D30B

¿Cómo poner en red un FieldPoint y una computadora con Ethernet? Conecté el módulo de red de mi FieldPoint o controlador de Compact FieldPoint , pero no aparece en Measurement and Automation Explorer (MAX). ¿Cómo pongo en red mi FieldPoint a mi computadora cliente? URL: http://digital.ni.com/public.nsf/allkb/5C80E80C937FDED88625740400072C61

イーサネットを使用してFieldPointをホストコンピュータにネットワーク接続する方法 FieldPointまたはCompact FieldPointコントローラ、ネットワークモジュールを接続しましたが、Measurement and Automation Explorer（MAX）に表示されません。 FieldPointハードウェアをホストコンピュータにネットワーク接続するにはどうすればよいですか？ URL: http://digital.ni.com/public.nsf/allkb/88D835F79053B509862574D700327223

In MAX, How Can I Link my [c]FP to a New IP Address? I have configured a compact FieldPoint system on my local subnet with plans to move it to another subnet. I save the Measurement & Automation Explorer (MAX) IAK file and import it on a computer on the new subnet with the [c]FP system. However, MAX now shows the system configuration on the URL: http://digital.ni.com/public.nsf/allkb/EED81C50334B8023862572E4004DC06F

In Measurement & Automation Explorer (MAX), how can I relink my [compact]FieldPoint system to a newer IP address? I have configured a [compact]FieldPoint system on my local subnet with plans to move it to another subnet. I save the MAX IAK file and import it on a computer on the new subnet with the [compact]FieldPoint system. However, MAX now shows the system configuration on the new subnet and an URL: http://digital.ni.com/public.nsf/allkb/B021C0871E628928862572E4004DCE82

FTP Transfer of Files Between Host and Real-Time Targets in MAX How do I use FTP to transfer files between my host machine and a Real-Time target using Measurement and Automation Explorer (MAX)? URL: http://digital.ni.com/public.nsf/allkb/4DCF9D581C491E9F8625711B005FA539

在MAX中通过FTP在主机和Real-Time设备间传输文件 使用Measurement and Automation Explorer (MAX)如何在主机和Real-Time设备间传递文件? URL: http://digital.ni.com/public.nsf/allkb/79128CA06DDE044C862573A6004B3BC5

於MAX中利用FTP在Host Machine及Rea-Time target間傳送檔案 我要如何於MAX中利用FTP在Host Machine及Rea-Time target間傳送檔案？ URL: http://digital.ni.com/public.nsf/allkb/3081FB662FB0B96F86257436000DF8E2