Error 2721 When Installing from Device Drivers CD
I am attempting to install one of the drivers on my Device Drivers CD onto my computer. When I try to run the driver, I receive error 2721, and the installer stops. What do I need to do to make this work?
URL: http://digital.ni.com/public.nsf/allkb/A85D35F6DDEA693486256E5C000E7918
|
How Can I Perform an Asynchronous Analog Input Operation in LabVIEW?
I am performing an analog input operation with an DAQ card in LabVIEW. I have noticed that the Analog Input Read will 'hang' the computer until either all the data I have requested becomes available or until a timeout condition occurs. During this waiting period, the processor usage display in
URL: http://digital.ni.com/public.nsf/allkb/F9DF020231CB1A4D86256D41007D4B0E
|
I See Multiple Instances of nipalsm in the Windows Task Manager after Installing New NI Driver Software
Should I worry about multiple instances of nipalsm showing up in the Windows Task Manager?
URL: http://digital.ni.com/public.nsf/allkb/1212376A1C10A99B86256D12006C79EA
|
'Driver not Found' or 'Failure Loading Driver' Using Visual Basic Examples for NI-DMM, NI-Scope, NI-FGEN and NI-DSA
When I run the Visual Basic examples for NI-DMM, NI-SCOPE, NI-DSA, and NI-FGEN or create them from scratch, I always get an error that it can't load the driver. How can I get around this?
URL: http://digital.ni.com/public.nsf/allkb/440B50D1209E33E586256C4800475730
|
NI-DMM, NI-Scope, NI-FGEN, NI-DSA用のVisual Basicサンプルで'Driver not Found(ドライバが見つからない)' もしくは 'Failure Loading Driver(ドライバロード失敗)'が発生します。
NI-DMM, NI-SCOPE, NI-DSA, NI-FGEN用のVisual Basicサンプルを実行しようとする、またはゼロから作成した時、ドライバがロードできないとのエラーが発生します。どのように直せばいいのでしょうか？
URL: http://digital.ni.com/public.nsf/allkb/120B491CB80BDF818625720C004B1664
|
Can I Control Each Analog Output Channel on My NI-4551 Independently?
I am using an NI-4551 Dynamic Signal Analyzer (DSA) device for an analog output application. Can I generate two independent waveforms, one on each analog output channel?
URL: http://digital.ni.com/public.nsf/allkb/D404DC0C8234915D862569BD00667FD8
|
What Is the Swept Harmonic X Measurement Type In the NIDSA Read Measurement Function?
What is the Swept Harmonic X measurement type in the NIDSA Read Measurement function?
URL: http://digital.ni.com/public.nsf/allkb/C5DB129F1F1D02F2862569BC00743E56
|
C言語もしくはCVIにて、NI-DAQを用いてDSAボードへ、トリガ集録を設定するにはどのようにしたら良いでしょうか？
C言語もしくはCVIにて、NI-DAQの関数を用いて、PCIバス用のNI 44xx や NI 45xx のダイナミック信号アナライザ (DSA) ボードへ、トリガ集録を設定するにはどのようにしたら良いでしょうか？
URL: http://digital.ni.com/public.nsf/allkb/862567530005F0A1492569B600269296
|
Trouble with NI-DSA 1.11 after Installing LabVIEW 6.0
I installed LabVIEW 6.0 and I allowed it to install NI-DAQ 6.8 on my machine. I already had NI-DSA 1.11 installed. Now I have a problem. Whenever I try to run any VIs that use the NI-DSA VIs, I see the following error message:Functions: labview.exe - Entry Point Not FoundThe procedure
URL: http://digital.ni.com/public.nsf/allkb/862567530005F09F862569430011F778
|
How Do I Set Up a Triggered Acquisition for the DSA Boards in C or CVI with NI-DAQ?
How do I set up a triggered acquisition based on an external digital trigger for the NI 44xx and NI 45xx Dynamic Signal Analyzer (DSA) boards in C or CVI with NI-DAQ function calls?
URL: http://digital.ni.com/public.nsf/allkb/5644685CEFD16783862568200054FA60
|
