Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Time-Out Error with GigE Vision Camera Why do I get a time-out error when trying to do a snap or grab with my GigE Vision camera? URL: http://digital.ni.com/public.nsf/allkb/17A956942535A2C786257419007778FF

'Error Updating Driver' Message When Switching Between IMAQdx and IMAQ for 1394 Driver I have a 1394 Firewire camera that is detected in MAX. When I right click the camera to associate the camera with a driver different from its current driver, I get an error message stating "Error Updating Driver". Why does this happen? URL: http://digital.ni.com/public.nsf/allkb/1CADF13407F08EB3862573F60083BA0B

The Imaging Source DFK FireWire Camera Not Appearing in MAX Why does my FireWire camera produced by The Imaging Source (model DFK 31BF03-Z) not appear in MAX? URL: http://digital.ni.com/public.nsf/allkb/63F6955E8D91A5D2862573CC008002EF

What is the Camera Validator? I just installed the Vision Acquisition Software and an executable called the Camera Validator was also installed. What is it used for? URL: http://digital.ni.com/public.nsf/allkb/72939B29EA578411862573BF00706500

IEEE1394カメラがMAXでGenericと認識される理由とその対応方法 Vision Acquitistion SoftwareをインストールしてIIDC準拠のIEEE1394カメラを接続しました。Windowsのハードウェア接続ウィザードでドライバを自動でインストールしました。正常に認識されたようですが、MAXで画像を集録しようとするとエラーが出て集録できません。< URL: http://digital.ni.com/public.nsf/allkb/627A49B8F41910A48625739B00010589

Why does my CVS not Display My FireWire Camera When I Expand Devices and Interfaces? Do I have to Refresh (F5) Everytime? I have connected my FireWire camera to the CVS and in Measurement and Automation Explorer (MAX), I expand the Devices and Interfaces node for the CVS but I only see my Reconfigurable I/O (RIO) part. The camera does not appear. However, if I refresh by pressing F5 or selecting it from the menu, the URL: http://digital.ni.com/public.nsf/allkb/9A99245C7EE29B3A862573990059A537

Why does my GigE Vision Camera not work in Vision Builder AI with IMAQdx? I have a GigE Vision Camera and I can get images in MAX and LabVIEW. However, when I open the Acquire Image (IEEE 1394 or GigE) step, I am able to set it up properly and change attributes. However, when I click OK, the step always fails. Vision Builder AI puts the step in the State window but the URL: http://digital.ni.com/public.nsf/allkb/5ABF4D267EE38E548625735B00545489

為什麼使用 Vision Builder AI 與 IMAQdx 無法讓我的 GigE 相機正常動作？ 我有一台 GigE 相機並且可以在 MAX 與 LabVIEW 中擷取到影像。然而，當我在 VBAI 中使用 Acquire Image (IEEE 1394 or GigE) 步驟，我可以設定與改變相機屬性，當按下 OK 按鈕後，此步驟便會失敗。 Vision Builder AI 有將這個步驟顯示在 State window 上但是此步驟總是失敗且沒 URL: http://digital.ni.com/public.nsf/allkb/381A8375235A43D586257377000D47DD

Why can I see my CVS in MAX but not in LabVIEW 8.0? I installed NI-IMAQdx and/or NI-IMAQ for IEEE 1394 cameras on my host computer. When I connect my CVS to the network, I can see it in MAX after refreshing. However, if I open LabVIEW and try to create a target, the option for searching for CVS units does not appear. How can I connect to my CVS from URL: http://digital.ni.com/public.nsf/allkb/6354A02D073C4EB38625730500504D1F

Dalsa Spyder GigE Cameras & GigE Vision Compliance My Dalsa GigE Camera says it is GigE Vision Compliant but I don't see it in MAX, even though I have the latest IMAQdx driver installed. URL: http://digital.ni.com/public.nsf/allkb/00C1A11496B1C2E8862572ED0047B33F