Error 50150 - Reboot USB 9162 after upgrading to DAQmx 8.7
Immediately following an upgrade to DAQmx 8.7 and using a USB-9162, a user may see error 50150 when attempting to use the device until they restart Measurement and Automation Explorer (MAX) or reboot. The Found New Hardware Wizard may also prompt you to reboot. USB-9162 devices should not
URL: http://digital.ni.com/public.nsf/allkb/D046874B01378D42862574170072561E
|
Measurement Studio Compatibility with the Data Execution Prevention (DEP) Setting on Windows Vista
Are there any issues associated with Measurement Studio support for Visual Studio 2008 and the Data Execution Prevention (DEP) Setting on Windows Vista?
URL: http://digital.ni.com/public.nsf/allkb/94C800ADF9291B798625740B00727DFF
|
Why Do I Receive DAQmx Error -200718 When I Externally Calibrate the NI 446x with DAQmx 8.7.1?
I am using NI-DAQmx 8.7 or 8.7.1. When I try to self-calibrate my NI 446x device from MAX, it calibrates successfully. When I try to externally calibrate the board manually or with Calibration Executive, I receive Error -200718 occurred at DAQmx Adjust DSA AI Calibration.vi.
URL: http://digital.ni.com/public.nsf/allkb/40DB974EAD98BECA86257408005909E5
|
Why Do I Get Error -224939 When Doing DIO Memory Mapping Reconfiguration?
I get error -224939 when using a DAQmx Channel property node to configure DO.MemMapEnable.
URL: http://digital.ni.com/public.nsf/allkb/A5529E53416B7D92862573FC000011A9
|
How Do I Acquire Data from More than One CompactDAQ Module in LabVIEW SignalExpress?
I need to acquire data from multiple modules in my cDAQ-9172 chassis using LabVIEW SignalExpress. How do I do accomplish this?
URL: http://digital.ni.com/public.nsf/allkb/7F890A8413C0544A862573F4006D4E63
|
Can I use FPGA Emulation Mode in a PXI System with a R Series Expansion Chassis for cRIO?
I have a cRIO Expansion Chassis NI-9151 connected to an R-Series PXI-7833R card. I am trying to use the "Use Target Hardware for I/O" option to emulate I/O of the modules on the cRIO expansion chassis, but instead of the actual signals, I seem to be getting random data back. Isn't this
URL: http://digital.ni.com/public.nsf/allkb/76240748163E2D33862573EF003ADB98
|
USB-621x Can Generate Unexpected Values with NI-DAQmx 8.7
When using NI-DAQmx 8.7 driver software, NI USB-621x devices (USB bus-powered M Series multifunction DAQ) may generate unexpected values on the analog output channels. National Instruments released NI-DAQmx 8.7.1 to fix this problem. This behavior does not occur in previous versions of
URL: http://digital.ni.com/public.nsf/allkb/58C3C3F69606C1B8862573EF00802143
|
Calibrating the NI 449x with DAQmx 8.7
I am using NI-DAQmx 8.7. When I try to self-calibrate my NI 449x device from MAX, I get an 'Internal Software Error.' When I try to calibrate the board using LabVIEW or Calibration Executive, I receive Internal Software Error -223043.
URL: http://digital.ni.com/public.nsf/allkb/99258CF499D0DD5E862573E60061BE52
|
Product Notice: Software Problem May Corrupt Configuration in MAX
National Instruments has identified a problem in NI-DAQmx 8.6.0f12 that in some cases may corrupt your configuration data in Measurement & Automation Explorer (MAX) when upgrading NI-DAQmx, or another driver that updates NI-DAQmx. Please accept our apology for any inconvenience this may
URL: http://digital.ni.com/public.nsf/allkb/F140447B994578ED862573E500571FB2
|
Some Manuals Provide Incorrect Instructions for Accessing the Device Documentation Browser
Some DAQ hardware documentation indicates that Start menu shortcuts exist for device documents. However, when I try to access these shortcuts, they are not installed on my system. Have the shortcuts moved?
URL: http://digital.ni.com/public.nsf/allkb/AAB917E1AB320301862573E00074E982
|
