Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Doesn't My Third-Party Fieldbus Device Show Up in the Configurator Software? When I attach a non-NI Fieldbus device to my interface board it does not show up in the Configurator software. Why is this? URL: http://digital.ni.com/public.nsf/allkb/BF62898D9420D951862569DF005AE70F

Are the NI Fieldbus Hardware and Software Compatible with Windows 2000 and Windows Me? The NI catalog says the Fieldbus driver and Configurator software are compatible with Windows NT and Windows 9x, but Windows 2000 and Windows Me are not listed. Have they been tested and are they compatible? URL: http://digital.ni.com/public.nsf/allkb/DBC1FC6ED40CE722862569D2005E3B00

How Should I Set the Address for the NI-FBUS Interface Card? The nifSetAddress function seems to work fine for field devices but does not work properly when attempting to use it to set the address for the interface card. URL: http://digital.ni.com/public.nsf/allkb/0EBA765A0FE3F0AF862569D1006A5A8F

Errors When the Alert_Key Parameter Is Set to Zero (Default) Why do I receive errors when the Alert_Key parameter is set to zero (default) and what can I do to fix this? URL: http://digital.ni.com/public.nsf/allkb/7F18CCC28FE1C0D086256998005F8995

How Can I See What Communication is Occurring Between Foundation Fieldbus Devices? How can I create a log of all of the communication that occurs on the network so that I can troubleshoot installing a Foundation Fieldbus device or a problem on the network? URL: http://digital.ni.com/public.nsf/allkb/5BA54782FF38597186256930006A5F5D

What Is the Foundation Fieldbus Network Configurator and Do I Need to It to Use a Fieldbus Network? There is often confusion for new users on what a Fieldbus network requires. URL: http://digital.ni.com/public.nsf/allkb/0FA23DE1D08992208625692D00824933

What Hardware Do I Need to Get Started with FOUNDATION Fieldbus? I am not familiar with Fieldbus hardware or software. What is the bare minimum setup that I need, to get started? URL: http://digital.ni.com/public.nsf/allkb/9044B17DD796D07D86256E8E0025CA34

What Hardware Do I Need to Get Started with FOUNDATION Fieldbus? I am not familiar with Fieldbus hardware or software. What is the bare minimum setup that I need, to get started? URL: http://digital.ni.com/public.nsf/allkb/AE48BC0EB9ADA6C0862571000000A058

Communicating with Fieldbus Devices from HMI/SCADA Packages, Basic Programs, or C Programs Fieldbus offers an open hardware standard that many vendors can use, but how can I communicate with Fieldbus devices from my software? URL: http://digital.ni.com/public.nsf/allkb/9B97A38B10A28B51862569290063F5A3

Can I Use the Compel Time (CT) Packet with AT-FBUS Boards? Problem: Can I use the Compel Time (CT) packet with AT-FBUS boards? Solution: The communications stack does support the Compel Time (CT) packet. However, this new feature will not work on AT-FBUS boards that are revision F or earlier. URL: http://digital.ni.com/public.nsf/allkb/D586BEBA5823DBBE862568E2005DF397