Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Implementing Feedforward Position Component on NI-Motion Controllers How can I implement a feedforward position component to my system if I know that my load will vary linearly as I move away from the zero position? URL: http://digital.ni.com/public.nsf/allkb/53BF23F982C3BF17862572AD00701503

NI Motion Readme Files Problem: Where Can I Find the NI Motion Readme Files? Solution: Use the following links to access previous Readme files for NI Motion, starting with NI Motion 7.0. Related Links: NI Motion 7.6 Readme NI Motion 7.5 Readme NI Motion 7.4 Readme NI Motion 7.3 Readme NI Motion 7.2.1 Readme NI Motion 7. URL: http://digital.ni.com/public.nsf/allkb/6CF70256ACA784DF8625729D00636E93

NI-Motion Readme 파일 문제점: NI-Motion Readme 파일을 어디에서 찾을수 있습니까? 솔루션: NI-Motion 7.0 부터의 NI-Motion Readme 파일은 아래 관련링크를 통해 찾으시면 됩니다. 관련 링크: NI-Motion 7.5 Readme NI-Motion 7.4 Readme NI-Motion 7.3 Readme NI-Motion 7.2. URL: http://digital.ni.com/public.nsf/allkb/55A2EC70667EF58C862572A500057E0F

Read Velocity with Dual Loop Encoder Feedback I have an NI-Motion axis set up for Dual Loop Encoder feedback. When I use the Read Velocity function, what is the returned velocity based on? URL: http://digital.ni.com/public.nsf/allkb/6851E826573B72E086257297007EE539

Installation Halts with error, 'Microsoft Internet Explorer 4.0 or higher is required.' When setup initializes for an MSI installer such as the driver CD, the installation halts and displays a prompt that reads, 'Microsoft Internet Explorer 4.0 or higher is required. Please see http://www.microsoft.com/ie for more information on how you can download Internet Explorer.' However, URL: http://digital.ni.com/public.nsf/allkb/59E3886EFB79ABA186257295005837F3

Measurement & Automation Explorer is Slow When a Mapped Motion Controller is not Reachable When I disconnect or shut down my PXI system, my mapped motion controller appropriately gets a red X but Measurement & Automation Explorer (MAX) starts responding very slowly. What is going on and what can I do about it? URL: http://digital.ni.com/public.nsf/allkb/E77CCB07ED7A7E5F86257287007431E9

Red X on My Mapped NI Motion Device After Rebooting RT I get a red X on my mapped NI motion device after I reboot the RT Controller. I have tried refreshing MAX, unmapping and remapping, and restarting MAX. None of them seem to work. How do I fix this? URL: http://digital.ni.com/public.nsf/allkb/88CEE91662EDB6E7862572840080849C

How Do I Remove Unsupported NI Software from Windows Vista to Install Officially Supported Versions? I have installed National Instruments software that did not officially support Windows Vista on my Windows Vista computer. I would now like to install the officially supported versions, however running the latest installer instructs me to first uninstall previous versions of NI software. How URL: http://digital.ni.com/public.nsf/allkb/D3A4261454C01583862573D0006BA3C2

How Do I Remove Unsupported NI Software from Windows Vista to Install Officially Supported Versions? I have installed National Instruments software that did not officially support Windows Vista on my Windows Vista computer. I would now like to install the officially supported versions, however running the latest installer instructs me to first uninstall previous versions of NI software. How URL: http://digital.ni.com/public.nsf/allkb/B4BF3B96988453B98625728100009670

Windows Vista 에서 정식으로 지원되는 소프트웨어를 설치할때 이전 버전의 소프트웨어를 어떻게 제거 할 수 있습니까? 제 Windows Vista 컴퓨터에 정식적으로 지원되지 않는 National Instruments 소프트웨어를 설치 하였으나 Windows Vista 지원이 되는 새로운 버전들을 재 설치 하고 싶습니다. 하지만 최신의 버전을 설치 하려고 하면 다음과 같은 메시지가 뜹니다. 어떤 방법으로 해결 ■> URL: http://digital.ni.com/public.nsf/allkb/36D809F54FC93E058625730D003721C7