드라이버 세션을 열지 않고 프로그램적으로 NI 모듈형 인스트루먼트 모델을 선택하는 방법
어떻게 하면 드라이버 세션 없이 NI 모듈형 인스트루먼트(고속 디지타이저, 신호 생성기, 디지털 멀티미터, 고속 디지털 생성/분석기, 스위치, RF 신호생성기)의 모델(예를 들어 ,NI PXI-5122)을 프로그램적으로 찾아볼 수 있나요? DAQmx 장비에 대해서는 DAQmx System 프로퍼■>
URL: http://digital.ni.com/public.nsf/allkb/77DE021537FF627A862571B2002C3056
|
How Can I Programmatically Determine the Serial Number of My NI Modular Instrument Without Opening a Driver Session?
How can I programmatically determine the serial number of my NI Modular Instrument (High-Speed Digitizer, Signal Generator, Digital Multimeter, High-Speed Digital Generator/Analyzer, Switch, RF Signal Generator) without opening a driver session? For DAQmx devices, I can use a DAQmx System
URL: http://digital.ni.com/public.nsf/allkb/4FCFB72CC806AE6B8625706800705C1F
|
我該如何在程式中得知我的NI模組化儀器的序號而不用開啟 Driver session?
我該如何在程式中得知我的NI模組化儀器的序號(高速取樣器, 訊號產生器, 數位電錶, 高速數位產生器/分析器, 切換器, RF 訊號產生器)而不用開啟 Driver session? 對於DAQmx 裝置, 我可以使用 DAQmx System property node. 模組化儀器有沒有方法?
URL: http://digital.ni.com/public.nsf/allkb/B95192FE8B724C9686257444000F325B
|
Using NI-ModInst to Query Device Specific Information such as Device Name and Model Number
How can I query my system for Modular Instrument (High-Speed Digitizer, Signal Generator, Digital Multimeter, High-Speed Digital Generator/Analyzer, Switch, RF Signal Generator) device specific information? I'm looking for a method to obtain details such as name, number, and model without
URL: http://digital.ni.com/public.nsf/allkb/8532AFF2C7E14F5E86256FEA003E202F
|
Do the NI Modular Instrument IVI Drivers use State Caching?
The NI modular Instrument drivers are IVI compliant, but does that also mean that they use state caching to store configurations?
URL: http://digital.ni.com/public.nsf/allkb/D296106FF667EFB986256FE80060EB46
|
請問NI模組化儀器的IVI驅動程式支援狀態快取(State Caching)嗎?
NI模組化儀器是與IVI相容的，但是那也代表他們使用狀態快取來存取指令嗎?
URL: http://digital.ni.com/public.nsf/allkb/063475EF62FE899C8625704D0021078F
|
Why Am I Getting a 'No Explicit Path Found Between the Two Channels' Error?
I initially wrote a program to connect two channels in the SCXI module in matrix mode. During the testing phase, the connectivity of the route created was checked and the path was indeed created. However when I write another program to disconnect the channels I get an error that no explicit
URL: http://digital.ni.com/public.nsf/allkb/3C291003766C61A086256FE40048BC8D
|
NI-SWITCH에 대한 Help문서를 어디서 구할수 있습니까?
저는 프로젝트를 수행하고 있고 NI-SWITCH에 대한 help문서가 구하고 싶습니다. 그 문서가 어디있는지 알수가 없습니다. 어디서 이 문서를 구할수 있습니까?
URL: http://digital.ni.com/public.nsf/allkb/CEFD592EF553FDB286256FEA00315FF8
|
Where Can I Find Help Documentation for NI-SWITCH?
I need some help with configuring and programming a switch application using NI-SWITCH. Where can I find documentation?
URL: http://digital.ni.com/public.nsf/allkb/1C58201F775ADF7F86256F790067E26F
|
National Instruments Measurement Studio support for NI Modular Instruments cannot be installed.
Measurement Studio support for Modular Instruments cannot be installed when the following procedure is followed. Install a version of the Driver CD which contains version X of IVI Install Measurement Studio Install a Modular Instrument (NI-DMM,
URL: http://digital.ni.com/public.nsf/allkb/1C413FD1A0A25F7C86256F3200614154
|
