Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Do I Configure My SCXI Chassis for a Real-Time Target in MAX? I have an SCXI chassis connected to a Real-Time Target (for example, a PXI-1050 combo chassis with PXI-8186 RT controller). How do I configure the SCXI chassis and modules in Measurement and Automation Explorer (MAX) for use on the Real-Time Target? URL: http://digital.ni.com/public.nsf/allkb/155924F3CE83E2C2862571F1006E5532

MAX에서 Real Time 타겟으로 된 SCXI 섀시를 어떻게 설정합니까? Real-Time 타겟에 연결된 SCXI 섀시를 가지고 있습니다.(예를들어, PXI-8186RT 컨트롤러를 가진 PXI-1050 콤보 섀시) MAX에서 Real Time 타겟으로 사용하려고 하는 SCXI 섀시와 모듈들을 어떻게 설정합니까? URL: http://digital.ni.com/public.nsf/allkb/49DFB0CD44A02FB4862572040016A7DA

Configuring the Ethernet Adapter on Windows 95/98 VXI/VME or PXI Embedded Controllers How do I install the integrated ethernet adapter on a Windows 95/98 PXI or VXI/VME controller? URL: http://digital.ni.com/public.nsf/allkb/5F544B5199A6B003862571EA0007FF94

Troubleshooting Tips for GigE Vision Cameras Where can I find troubleshooting tips as well as general information on GigE Vision cameras? URL: http://digital.ni.com/public.nsf/allkb/9B44E123EFBAB226862571E30066891C

Extra Serial Port Visible in MAX with PXI-8146RT Controller The PXI-8146RT controller has only one serial port, so why do I see two serial ports in MAX when using NI-Serial 3.1? URL: http://digital.ni.com/public.nsf/allkb/383AE95CE6D8328E862571B700706DF4

如何从软盘启动PXI或VXI控制器？ 我希望通过A:区的软盘启动PXI或VXI来重新恢复操作系统，但是控制器每次总是先重硬盘启动。我需要做什么改动？或者，我希望用一张RT PXI启动盘启动我的RT系列的PXI控制器进入实时操作系统，但是控制器每次总是先重硬盘启动。我需要做什么改■> URL: http://digital.ni.com/public.nsf/allkb/4FF6BDB55381FE3B4825714A0034AFE6

Unable to Open Session to “visa://IP Address/PXI2::15::INSTR” I have installed the necessary software and configured all hardware for my PXI controller, but each time I try to access any of the devices I get the following error:Unable to open session to “visa://192.168.99.5/PXI2::15::INSTR” URL: http://digital.ni.com/public.nsf/allkb/293080923B466C9A86257141005775FD

PXI-8170RTで集録画像を表示する方法 PXI-8170をRTターゲットとして、画像集録のプログラムを作成しています。8176や8186では、IMAQ RT Video Outを使って、 コントローラのVGA出力より画像を出力できましたが、8170でも画像の出力はできますか？ URL: http://digital.ni.com/public.nsf/allkb/3F8826B2CE3338EE8625713A001DDD2E

Error BFFF003A When Enabling Interrupts in MAX with 3rd Party Device Why do I get an error when enabling interrupts in MAX with a 3rd Party Device? URL: http://digital.ni.com/public.nsf/allkb/DFF952E483E212658625712B007B72FB

How Can I Add Language Support For an 8196 Controller With Embedded Software CD 1.3? Non-ASCII (For example Japanese) channel or task names for DAQmx are not supported without Language Support installed. This is available for other targets, but when I choose Install Software for an 8196, the language support component is not an option. Is this not available? URL: http://digital.ni.com/public.nsf/allkb/7CC8ED136107C935862570A8005994DA