Incorrect PID Update Rate Error (-70108) with NI 7340 and NI 7350 Controllers in MAX
I correctly set the PID rates in Measurement Automation Explorer (MAX) to valid values (as described in the NI 7340 and NI 7350 hardware manuals and the 'Enable Axes' VI/function help). When I try to initialize my controller from MAX, I receive error -70108
URL: http://digital.ni.com/public.nsf/allkb/C0C521CD425A253B862574400069237A
|
How Can I Specify Acceleration, Velocity, and Deceleration for a Contoured Move?
How can I specify acceleration, velocity, and deceleration profiles for a contoured move when the trajectory generator on the motion controller is not used during a contoured move?
URL: http://digital.ni.com/public.nsf/allkb/F58339DBA74CF728862573760005B0B1
|
How Can I Trigger an Event Off of an Encoder Line (A, B, or Z)?
I would like to trigger an event on my 733x, 734x, or 735x motion controller card based off of an encoder line (A, B, or Z). How can I do this?
URL: http://digital.ni.com/public.nsf/allkb/70BF642F99126FC38625736F0056D7AB
|
Ghosting on Motion Controller Analog Inputs
I have an NI-73xx Motion controller and I am using the analog input to read an analog signal. I have hooked up my signal to analog input channel 3, but in my program I am reading from analog input 1. Even though I am reading from a different channel than what I have connected, I still see
URL: http://digital.ni.com/public.nsf/allkb/9CDFFA9DB8A876A48625733C0012796E
|
Will Electronic Gearing Work with an Axis that is Performing Contour Moves?
I plan to electronically gear two motion axes together, and perform contour moves with the master axis. Will this work?
URL: http://digital.ni.com/public.nsf/allkb/629442FB7D32074D862573310050C955
|
National Instruments Motion Controller Boards & Drivers
I have a National Instruments Motion Controller board but I am unsure if I should use ValueMotion, FlexMotion or NI-Motion. Which one should I use and why?
URL: http://digital.ni.com/public.nsf/allkb/782E7400A9FE22A68625731C005C973A
|
National Instruments 运动控制板卡和驱动
我有一块NI的运动控制卡，但是我不确定它使用ValueMotion, FlexMotion 或者 NI-Motion，我如何选择以及为什么？
URL: http://digital.ni.com/public.nsf/allkb/30A48EFA7F13D20C862574000017F026
|
Determining the Step Length and Control Loop Update Period for Servo Tune
I have a NI 7330/7340/7350 motion controller. I am using it to control a servo motor, but I am having trouble tuning it in the Servo Tune tab in the Measurement & Automation Exploxer (MAX). In the Servo Tune's Step Response tab, what is the appropriate value for Step Length? Also, in the
URL: http://digital.ni.com/public.nsf/allkb/98DE5BEB4A379A4B8625730D007258AC
|
A Simple Method for Servo Motor Tuning
I can't seem to get my servo motor tuned. Is there a simple method to find PID gains that will be give me something close to my desired response?
URL: http://digital.ni.com/public.nsf/allkb/806F6F0B775FAF32862572FA0052F2AB
|
当使用NI运动控制产品时，P-Command和Stepper两种模式有什么不同？
我听说P-Command（位置指令）和stepper这两种模式很相似，我想知道它们之间的区别。因此，当使用NI运动控制产品时，P-Command和Stepper两种模式有什么不同？
URL: http://digital.ni.com/public.nsf/allkb/CE30DB738A91E04B862572E0003D9CFB
|
