Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Can the NI-565x Series Generate a Damped Sine Wave? I would like to generate a damped sine wave with the NI 5650/5651/5652 RF signal generators. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/62BDAE50D5B13D28862573BF005D7E9F

Sample Rate Error -1074135016 or -1074118530 when Using the NI-SCOPE Property Node Why do I get errors -1074135016 or -1074118530 when using the NI-SCOPE property node to configure horizontal properties? The error message tells me that I have set my sampling rate too high, but I know I have set it below the maximum rate of my scope. URL: http://digital.ni.com/public.nsf/allkb/74C7109C66B5D304862573BE005726D8

Error-50251 When Performing Self-Calibration on My NI-5922 After Upgrading from NI-SCOPE 3.3.2 to NI-SCOPE 3.4 Previously I had NI-SCOPE 3.3.2, which I had installed from the August 2007 device driver CDs. I recently upgraded my NI-SCOPE driver to version 3.4 and now I cannot self-calibrate my NI-5922. In Measurement and Automation Explorer the self-calibrate option is disabled and I do not see any URL: http://digital.ni.com/public.nsf/allkb/B84AE4281BA524508625737C005375AF

NI-Scopeでのサンプリングレートの設定 NI-Scopeでサンプリングレートを設定する際には、niScope Configure Horizontal Timing のmin sample rate を設定しますが、minという名称になっているのはどういう意味でしょうか？ ここで設定したサンプリングレートがそのまま適用されるのでしょうか？ URL: http://digital.ni.com/public.nsf/allkb/99852951BAF0415B862572F9001103E7

PXI-4110の電流レンジの設定 PXI-4110の仕様書（Specifications)を見ると、電流レンジが2種類になっていますが、プログラムで電流レンジを設定する際に使用するniDCPower Configure Output Range.viのレンジ入力は、倍精度浮動小数点（DBL）になっています。viのレンジの入力と、実際に設定されるレンジ URL: http://digital.ni.com/public.nsf/allkb/7F65289C7FDA9BD9862572F80010B962

I Cannot Change Device Number in MAX on Windows Vista After Upgrading Traditional DAQ Uninstalling Traditional DAQ 7.4.3 (or earlier) does not remove niconfig.daq from your system, and this creates an issue on Windows Vista for Traditional DAQ 7.4.4. URL: http://digital.ni.com/public.nsf/allkb/93C4A53A3ADDFFB5862572F00053E511

Why Do the NI PXI-5600 NI-Tuner VIs Have a Span Input? There are some VIs in the NI-Tuner API that require a span (bandwidth) input, but the NI PXI-5600 downconverter has a fixed 20 MHz real-time bandwidth. URL: http://digital.ni.com/public.nsf/allkb/ACD900CD628D4EFA8625726600089F17

Why Does the niScope Fetch Measurement.vi Take So Long to Process? I am acquiring a large record to my digitizer's onboard memory and then fetching chunks of data out using niScope Fetch Measurement.vi. However, even when I place a very small number into the Meas Waveform Size input the VI takes a very long time to process. This time seems to be directly URL: http://digital.ni.com/public.nsf/allkb/8403533DB4AB37C7862572130014056E

How Do I Configure the NI PXI-5152 for Real-Time Sample Rates Over 1 GS/S? I am trying to configure my NI-SCOPE code to acquire sample rates faster than 1 GS/s using the NI 5152. I have read that I can sample at 2 GS/s with this module, how can I achieve this? URL: http://digital.ni.com/public.nsf/allkb/C4DCF22F8E8C109A492574430067CDCB

How Do I Configure the NI PXI-5152 for Real-Time Sample Rates Over 1 GS/S? I am trying to configure my NI-SCOPE code to acquire sample rates faster than 1 GS/s using the NI 5152. I have read that I can sample at 2 GS/s with this module, how can I achieve this? URL: http://digital.ni.com/public.nsf/allkb/C57D36F398EADB8C8625721200377BB1