Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

我怎么才能在 LabVIEW 中通过编程来重置我的 FieldPoint CRT-500 的计数器 我现在在做一个项目是利用 cFP-CTR-500 来进行事件计数。 我需要通过编程来重围计数器。 这个操作是不是可行，如果可行，怎么才能做到呢？ URL: http://digital.ni.com/public.nsf/allkb/CEF3897BB90BF4DD862574F80047FA41

Why Is LabVIEW RT 8.20 on My cRIO Controller but Not on My Host? LabVIEW RT 8.20 is installed on my cRIO controller, but I am using LabVIEW RT 8.0 or previous on my host PC. How did this version get there and how can I change it back? URL: http://digital.ni.com/public.nsf/allkb/9E8786A9E32C5804862571DA0004673D

为什么LabVIEW RT 8.20在我的cRIO 控制器上却不在我的主机上？ 在我cRIO控制器上安装了LabVIEW RT 8.20的版本, 但是在我的PC主机上使用的却是LabVIEW RT 8.0活着更早的版本, 如何在这两种版本之间建立通信, 或者如何将控制器上的版本变成更早先的LabVIEW RT版本? URL: http://digital.ni.com/public.nsf/allkb/E9B046C4D6C8DC0D8625735B002FF636

cFP-20xx 컨트롤러에서 어떻게 시리얼 포트를 사용할수 있습니까? cFP-20xx Compact FieldPoint 컨트롤러에서 내장되어 있는 시리얼 포트를 어떻게 사용합니까? URL: http://digital.ni.com/public.nsf/allkb/0120FB12D1FB82BB86257146000CF2A2

Is My cFP-DI-304 Compatible With Versions of NI FieldPoint Before Version 5.0? I have NI-FieldPoint 4.1 on my computer. Will I need to upgrade my driver to communicate with my cFP-DI-304? URL: http://digital.ni.com/public.nsf/allkb/2D49E46F2E1CCD42862570D40071DCD0

cFP-DI-304 모듈이 NI-FieldPoint 5.0 이전버젼에서 사용가능합니까? PC에 NI-FieldPoint 4.1 가 설치되어 있습니다. cFP-DI-304 모듈을 사용하기 위해서는 드라이버를 업그레이드 해야합니까? URL: http://digital.ni.com/public.nsf/allkb/3F34017B5931D80B862570DC002F3022

我的cFP-DI-304能够与5.0之前的NI FieldPoint版本相兼容？ 我的电脑上有一个NI-FieldPoint 4.1,如果要与我的cFP-DI-304通信，我需要升级我的驱动程序吗？ URL: http://digital.ni.com/public.nsf/allkb/AEED263187608385862573D7004066D3

Error 33443 When Reading from a FieldPoint Module I receive error 33443 when sampling multiple channels of a FieldPoint or Compact FieldPoint module using the FieldPoint Read VI in LabVIEW. URL: http://digital.ni.com/public.nsf/allkb/A3C8F5FEA536CC5A862570AE0003E084

Unable to Locate an Ethernet FieldPoint Network Module in MAX (or FieldPoint Explorer) in Windows XP I have connected my FieldPoint communications module to the local ethernet, and I am certain that it is on the same subnet as my computer system. Also, I am sure that the IP configuration of the network module has already been set correctly (or is unconfigured). The FieldPoint module is not URL: http://digital.ni.com/public.nsf/allkb/0B043CFE88E055EF86256E600074F751

Error 37 When Upgrading LabVIEW Code with Serial Communication on FieldPoint Controller I have a program that runs in LabVIEW 6.1 that does serial communication with my cFP-2020 controller using the serial compatability VIs. Why do I get error 37 when I port the code to LabVIEW 7.0 and try to run it on my new cFP and FP hardware? URL: http://digital.ni.com/public.nsf/allkb/943F23CC1438560E86256E3D00752E23