Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Do I Get Error -32812 When I Read or Write to a cFP-180x from a cFP-2xxx? Why do I get Error -32812 when I read or write to a cFP-180x from a cFP-2xxx? URL: http://digital.ni.com/public.nsf/allkb/80A4EF3A7A1784D6862573F4000B20C5

FieldPoint OPC Server Update Rate Problem: At what rate does the OPC Server for FieldPoint update? Solution: The update rate is 10 ms, and it cannot be changed. The figure below summarizes how an OPC Server communicates with a FieldPoint Controller. URL: http://digital.ni.com/public.nsf/allkb/8DB8D79FF4AD0E85862573CB00772F6B

How Do I Use the Digital Input/Output Lines on my 7330, 7340, or 7350 Motion Controller Card? How do I program the Digital Input/Output (DIO) lines on my NI 7330, 7340, or 7350 Motion Controller card? URL: http://digital.ni.com/public.nsf/allkb/2D238C3BF101620C862573A60081BFFE

LabVIEW RT Memory Usage on FieldPoint Controllers I don't know how much memory and storage are left for my applications when I install and run software on my FieldPoint controller. URL: http://digital.ni.com/public.nsf/allkb/EEC34DB19DD2B40A86257377006BD663

cFP-180x Firmware Upgrade Fails on the 10.0.54 Subnet The firmware upgrade fails when my cFP-180x is on the 10.0.54 subnet. It begins to upgrade and then terminates. How do I get around this? URL: http://digital.ni.com/public.nsf/allkb/6A9C6B3D1BE8DA5786257338007B9080

Host 컴퓨터와 이더넷을 이용해 FieldPoint와 통신하기 FieldPoint 나 Compact FieldPoint 컨트롤러나 네트워크 모듈이 있는데 Measurement and Automation Explorer (MAX)상에서 보이지 않습니다. 어떻게 Host컴퓨터와 FieldPoint장치간 통신을 할 수가 있나요? URL: http://digital.ni.com/public.nsf/allkb/661431DCCED8C5A686257385002D9D21

How to Network FieldPoint to a Host Computer with Ethernet I have connected my FieldPoint or Compact FieldPoint controller or network module, but it does not appear in Measurement and Automation Explorer (MAX). How do I network my FieldPoint hardware to my host computer? URL: http://digital.ni.com/public.nsf/allkb/50BE7BEA4D5285DA862573370070D30B

IAK 파일로 Fieldpoint configuration 복구하기 현재 사용중인 FieldPoint 시스템의 설정이 지워졌습니다. 그렇지만 IAK 파일은 PC 내에 가지고 있습니다. FieldPoint의 설정값들을 복구할 수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/ECE65B8C803288048625733A00022DD1

Recovering a FieldPoint Configuration from the IAK File My FieldPoint system has lost its configuration, but I have a copy of the IAK file on my PC. Can I use this to recover my FieldPoint's configuration? URL: http://digital.ni.com/public.nsf/allkb/2EF82CA062692F4886257325008067BC

What Software Needs to be Installed to Activate the FieldPoint Recommended Software Sets in MAX? I have installed the August 2007 Driver CD or later, and I would like to use the recommended software sets for FieldPoint, but they are disabled. What software do I need to install to activate these recommended software sets? URL: http://digital.ni.com/public.nsf/allkb/B4394A1AE038A5FF8625731B005FE34F