Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Do the E-Series Analog Output Digital Triggering Examples in LabVIEW Work with the 671x Family of Analog Output Boards? I have a 671x board and I want to use digital triggering. Can I use the E-Series analog output digital triggering examples that ship with LabVIEW? URL: http://digital.ni.com/public.nsf/allkb/7822F6F36BC00852862568FC007549D9

Multiple Digital Triggers Using Real-Time System Integration (RTSI) Multi-function I/O (MIO) boards have at most one hardware digital trigger. How can I use National Instruments products to trigger a data acquisition system with more than one digital trigger? URL: http://digital.ni.com/public.nsf/allkb/F77237F61C520A95802568B6006EA3FA

使用实时系统集成（RTSI）总线进行多数字触发。 多功能I/O板卡（MIO）有最多一个硬件数字触发。请问我如何使用National Instruments的产品来触发一个有多线数字触发的数据采集系统？ URL: http://digital.ni.com/public.nsf/allkb/77CC4646F623E17D86256D6E0014B24C

CTR Buffer Read for DAQ-STC Counters Works Fine with Counter 1 but Gives Error -10920 with Counter 0 I get error -10920 when I perform buffer read with counter 0 on AT-MIO-16E-10 (or any E-Series Board) using the Meas Buffered Pulse-Period (DAQ-STC).vi in LabVIEW. I can run this successfully on counter 1. The same VI works fine with counter 0 on a different board. Why? URL: http://digital.ni.com/public.nsf/allkb/B488C6EE19B914E686256E8E002512D0

PC-516 Fails NI-DAQ Test when EXTCONV Pin is Connected to an External Source When I connect the EXTCONV pin to either an external function generator or to DGND, the device fails the NI-DAQ 6.0 test panels. If I disconnect the line, the device passes the NI-DAQ test. What is causing this problem? URL: http://digital.ni.com/public.nsf/allkb/F1CCCD39FF64E95286256627005E631E

Error -10411 with 1200 Series DAQ Board I receive error -10411 (counterBusyerror) with a 1200 series DAQ board (Lab-PC+, Lab-PC 1200/AI, DAQcard 1200, PCI 1200, SCXI 1200). URL: http://digital.ni.com/public.nsf/allkb/CD4B1279D65D353B8625662400694E40

Problems Performing Double-Buffered Pattern Generation at the Rate Specified for the DIO-32HS with NI-DAQ 5.1 I am using a function generator connected to the REQ1 pin to control the timing of a double-buffered, 16-bit pattern generation. It works flawlessly at 800 kilowords/second; however, when I increase the rate to 1 megaword/second and beyond, I observe stuttering at half-buffer boundaries. In other URL: http://digital.ni.com/public.nsf/allkb/5D29A66FF932CFED862565D7005DEA42

Existing Applications Return Error -10403 After I Upgrade My DAQ Device Why do my existing applications return error -10403 after I upgrade my data acquisition (DAQ) hardware? URL: http://digital.ni.com/public.nsf/allkb/F02DE719B1DFC7BE862565AF005175C8

在升級 DAQ 裝置之後, 寫好的程式產生了錯誤 -10403. 為什麼在升級 DAQ 硬體裝置之後, 寫好的程式產生了錯誤 -10403? URL: http://digital.ni.com/public.nsf/allkb/9C07DBAD0D0F7BED86256F48003765E9

Enabling Dithering on a Lab or 1200 Series Device If you are programming with LabVIEW, use the MIO Configure VI. This function (or VI) enables dithering on the Lab and 1200 Series devices (except the Lab-PC+). Refer to the NI-DAQ Function Reference Help or the LabVIEW Help for more information about using this function or VI, respectively. URL: http://digital.ni.com/public.nsf/allkb/0DA0E53D0A170A878625659C0079FE76