Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Does Resource Manager Hang? When trying to recognize and configure my VME-MXI-2 controller and chassis, Resource Manager (resman) hangs. How can I either overcome this or narrow down the cause of the hang? URL: http://digital.ni.com/public.nsf/allkb/EC0405C6A719DCE486256556006AF870

SETUPLDR: COULDN'T OPEN DRIVE MULTI(0)DISK(0)FDISK(0) error message Windows NT installation, whether booting from a WinNT boot disk or potentially installing from a network,may exhibit the following error message on a VXIpc-850 and VXIpc-745.SETUPLDR: COULDN'T OPEN DRIVE MULTI(0)DISK(0)FDISK(0).This problem shows up when you upgrade an 850 to NT4.0. URL: http://digital.ni.com/public.nsf/allkb/195E0E15D71D8F0786256E8E00231998

What is DOS Compatibility Mode in Windows 95 and How Does One Get Rid of It? In the Device Manager, you may see that the IDE drivers for the VXI embedded 850 under Windows 95 show that it is using DOS compatibility mode drivers. URL: http://digital.ni.com/public.nsf/allkb/AE9B9064665F14DD86256E8E00232065

Basics of Setting Up Dual-Ported or Shared Memory on a VXI Controller Problem: How do I set up dual-ported or shared memory on a VXI Controller? Solution: For a detailed description of how to configure and use shared memory from a National Instruments VXI/VME bus controller, see Application Note 158 which is linked below. URL: http://digital.ni.com/public.nsf/allkb/6CC5A5A6C2DE21CE862564800051EDDD

How Do I Change the RESMAN Delay on the GPIB-VXI-C? Problem: How do I change the RESMAN delay on the GPIB-VXI-C? Solution: The RESMAN delay can be edited through the Nonvolatile Configuration Changer. URL: http://digital.ni.com/public.nsf/allkb/ADC32BB3C47FE43D852564280048F6CA

On the VXI/VME-MXI, how should I Set the VMEbus Controller Bus Timeout Jumper Setting? On the VXI/VME-MXI, how should I set the VMEbus Controller Bus Timeout jumper setting? URL: http://digital.ni.com/public.nsf/allkb/8D54FB2F6DF66B9086256E8E00237EC2

On the VXI/VME-MXI, How Should I Set the MXIbus Controller Bus Timeout Jumper Setting? On the VXI/VME-MXI, how should I set the MXIbus controller bus timeout jumper setting? URL: http://digital.ni.com/public.nsf/allkb/8BA2B32070E11C6386256E8E002387C5

Why doesn't SetBusErrorHandler() ever get called? In my code, I set up a Bus Error Handling function, but it never gets called. Why? URL: http://digital.ni.com/public.nsf/allkb/34AF0306606069C8862562D6006F4C43