Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Can I Change the Debounce or Settling Time of my National Instruments Switch Device? How Can I Change the Debounce or Settling Time of my National Instruments Switch Device? URL: http://digital.ni.com/public.nsf/allkb/A6B277CBE811FCBA8625727D00548A9B

如何改变NI Switch设备的反跳时间或者稳定时间？ NI Home This Document is not yet Rated Rate this Document 如何改变NI Switch设备的反跳时间或者稳定时间？ 主要软件: Driver Software>>NI-DAQmx 主要软件版本: 8.3 主要软件修正版本: N/A 次要软件: N/A 硬件: Switches 问题: 如何改变NI Switch设备的反跳时间或者稳定时间？ 解答: NI-DAQmx驱动可用于改变存储在Switch硬件上的反跳时间。调用DAQmx Switch设备的“稳定时间”属性可以修改该时间。NI-DAQmx将该时间和母板的稳定时间相加。 URL: http://digital.ni.com/public.nsf/allkb/B1F7B289EC04AB81862572DC00326D1F

Why Am I Getting a 'No Explicit Path Found Between the Two Channels' Error? I initially wrote a program to connect two channels in the SCXI module in matrix mode. During the testing phase, the connectivity of the route created was checked and the path was indeed created. However when I write another program to disconnect the channels I get an error that no explicit URL: http://digital.ni.com/public.nsf/allkb/3C291003766C61A086256FE40048BC8D

Why Do I Get an Error When I Try to Add My PXI-2532 in 8x64 1-wire Topology in NI Switch Executive? A bug in NI-DAQ 7.2 prevents the PXI-2532 in the 8x64 1-wire toplogy to be added as a virtual device. The bug affect 'r4' of the topology the error wil most likely to be: Channel name specified is not valid for the switch device - Channel Name: r4. URL: http://digital.ni.com/public.nsf/allkb/C8E0574061FC014B86256EED0052E5D2

Can I Access My DMM or Switch Instrument through a Programming Environment while the DMM or Switch Soft Front Panel Is Open? Can I access my DMM or switch instrument through a programming environment while the DMM or switch soft front panel is open? URL: http://digital.ni.com/public.nsf/allkb/7E2036D685A6D23886256954006497C6

SwitchやDMMのソフトフロントパネルを開いてる間に他のプログラミング環境からSwitchやDMMにアクセスできますか？ SwitchやDMMのソフトフロントパネルを開いてる間に他のプログラミング環境からSwitchやDMMにアクセスできますか？ URL: http://digital.ni.com/public.nsf/allkb/082958BBAF73C3B386256F59003DADE2