Why Does My WSN Firmware Update Stall?
I am attempting to upload new firmware to my entire wireless sensor network. However, during the process there seems to be times when the update moves very slowly, or even stalls. How can I successfully deploy to all the nodes?
URL: http://digital.ni.com/public.nsf/allkb/CDC906470FAFF34F862575ED006E7B2B
|
Why Does my Existing WSN System Become Unstable When I Configure A New System Near It?
I currently have a WSN system set up consisting of 36 total nodes. I am now trying to deploy a second system nearby, but when doing so it causes the first system to become unstable. What is happening?
URL: http://digital.ni.com/public.nsf/allkb/F72197A91BEBB957862575ED006C7641
|
Connector Pane of my VI is not in the Expected Format for a LabVIEW WSN Top Level VI
I am trying to deploy my VI to my Wireless Sensor Network(WSN) target node and when I hit the run button I receive the following pop-up error. What can I do to fix this problem?
URL: http://digital.ni.com/public.nsf/allkb/49AB993C5429C360862575E50073A147
|
Extra Pulse Generated By NI PCIe-8255R When Using Close FPGA VI Reference
I am generating a pulse train from my NI PCIe-8255R. When I close the FPGA reference to my device it generates an unexpected extra pulse. Why is this happening, and how do I prevent it?
URL: http://digital.ni.com/public.nsf/allkb/180C2A1C1112BA2C862575E1006D6B6E
|
How Can I Distribute a LabVIEW Application that Uses the NI-435X Driver?
I have built a LabVIEW VI that interfaces with the NI-435X driver. I would now like to distribute my VI as an application. However, I do not see the NI-435X driver in the Additional Installers when I try to build my installer. How can I distribute this application?
URL: http://digital.ni.com/public.nsf/allkb/0FD958CBC0BB2840862575DF007BF900
|
Identifying Multiple Identical USB Raw Devices with NI-VISA
I used the VISA Driver Development Wizard to develop a USB driver for my USB RAW device. When I plug the USB device in, it is detected by Measurement & Automation Explorer (MAX) and I can communicate with the device without any problems. I have a second USB device which has the same Product ID
URL: http://digital.ni.com/public.nsf/allkb/83E8674ABD22BB7D862575DF0054D5BC
|
NI 9870 Does not show up in FPGA IO Constant
I have placed an I/O constant or I/O control as the input to my FPGA I/O Method Node or FPGA I/O Property Node and want to select my 9870/9871 module or one of it's ports. Why does it not show up as one of the selections?
URL: http://digital.ni.com/public.nsf/allkb/9BF90AF3B60A5458862575DE00541F3F
|
Communicating with a Tektronix Oscilloscope That Has LabVIEW Installed on It
I have a Tektronix scope that is running the Windows operating system. I have installed LabVIEW onto the operating system and want to use LabVIEW to view my signals. When I try to find the resource for the oscilloscope in Measurement & Automation Explorer, the oscilloscope is not listed. How do I
URL: http://digital.ni.com/public.nsf/allkb/EA756E42D02A7367862575DA00750252
|
Reenumerar el Chasis PXI No Actualiza el Número de Mi Chasis en Mis Dispositivos RIO
Estoy utilizando algunos dispositivos de la Serie R en mi chasis PXI. Sin embargo, cuando reenumero mi chasis utilizando Measurement & Automation Explorer (MAX) y hago clic en mi dispositivo RIO que está en el chasis, el número del chasis no cambia. ¿Por qué es esto, y cómo puedo cambiarlo?
URL: http://digital.ni.com/public.nsf/allkb/6BF5B4F1D01A0C3A862575DE005B3ED1
|
Renumbering PXI Chassis Does not Update My Chassis Number in My RIO Devices
I am using some R-Series devices in my PXI chassis. However, when I renumber my chassis using Measurement & Automation Explorer (MAX) and click on my RIO device that is in that chassis, the chassis number does not change. Why is this, and how can I change it?
URL: http://digital.ni.com/public.nsf/allkb/3F16C8047A91C641862575DA0058D945
|
