Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Code Generation Changes from Instrument I/O Assistant 1.x to 2.0 I am using the Instrument I/O Assistant (IIOA) to generate instrument communication code with Microsoft Visual Studio 2003 or Visual Studio 2005. After installing the National Instruments November 2005 Driver CD, when I open my existing project and regenerate the IIOA code, I am unable to build my URL: http://digital.ni.com/public.nsf/allkb/963760F48FF97D9D86257097004D1A55

Instrument I/O Assistant 1.x 與2.0程式碼產生的不同? 我使用 Instrument I/O Assistant (IIOA)在Microsoft Visual Studio 2003中產生程式碼，在安裝完NI 2005 Driver CD後，當我開啟現存的專案，再重新產生IIOA程式碼，我無法建立我的專安，請問該如何修覆? URL: http://digital.ni.com/public.nsf/allkb/AB955E08F499AF04862570C30061601C

Using Measurement Studio's LabWindows/CVI Conversion Utility on Non-English Operating Systems I'm trying to use the LabWindows/CVI Conversion utility that comes with Measurement Studio but I'm getting an error that says 'Measurement Studio cannot find the LabWindows/CVI installation directory'. What is causing this error and can I still use the utility? URL: http://digital.ni.com/public.nsf/allkb/0CC87209CB2BF7238625700200771CEC

Undo Zooming on a Measurement Studio Graph in Microsoft Visual Studio 6.0 How do I undo zooming on my Measurement Studio graph in Microsoft Visual Studio 6.0? URL: http://digital.ni.com/public.nsf/allkb/00CE251E6CF8454386256FEF006E0034

How Do I Use IVI Drivers in my Measurement Studio Project? I would like to use IVI instrument drivers with my Measurement Studio Project. I have done this implementation with LabWindows\CVI and would like to know the differences between that implementation and implementing in a Measurement Studio Project. URL: http://digital.ni.com/public.nsf/allkb/6064495CDD7711EE86256FDD00695F99

Using NI-DAQmx Task and the DAQ Assistant With Microsoft Visual Studio .NET 2003 How can I use the DAQ Assistant with Visual Studio .NET 2003 to setup my NI-DAQmx Task? URL: http://digital.ni.com/public.nsf/allkb/290D84D10809D4C086256FF20076F8B8

Measurement Studio 정식판을 설치했는데 예제를 실행시키면 Evaluation copy라는 메시지와 함께 30일간 사용가능하다는 메시지가 나타납니다. Measurement Studio 정식판을 설치했는데 예제를 실행시키면 Evaluation copy라는 메시지와 함께 30일간 사용가능하다는 메시지가 나타납니다. URL: http://digital.ni.com/public.nsf/allkb/332EFB3F670275A286256ECB001FF8D9

Measurement Studio用のIMAQ Visionに 関連するActiveXコントロールは「Evaluation Version」という警告メッセージが表示されます。 Measurement Studio用のIMAQ Visionをインストールしましたが、関連するActiveXコントロールは「Evaluation Version」という警告メッセージが表示されます。修正する方法はありますか? URL: http://digital.ni.com/public.nsf/allkb/5BAE8100F365E31186256EC100107310

Multiple Errors When Building a Visual Studio .NET Application with Measurement Studio 7.0 Merge Modules I created an application in Visual Studio .NET that uses some of the Measurement Studio 7.0 .NET components (user interface controls or assemblies). I then used the Visual Studio .NET setup project to create an installer for my application and I added the necessary merge modules to the setup URL: http://digital.ni.com/public.nsf/allkb/C44974DB5CBA657C86256E9400183360

Does Logos Support Synchronous DataSocket Write Operations? I would like to synchronously write data between two systems using DataSocket and Logos. Does Logos support synchronous DataSocket writes? URL: http://digital.ni.com/public.nsf/allkb/40A026312E38C6D6C1256E920016484E