Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Do I Set Precise IQ Rates in NI-RFSG Instead of Divide-By-N Rates? I want to be able to set a precise IQ rate, but it keeps coercing the rate to a different value. I see in the NI-RFSG Help that allowable rates consist of 100 MS/s, 50 MS/s, and (100 MS/s)/n. Is there any way to set a different rate? URL: http://digital.ni.com/public.nsf/allkb/29414155CC0E97C2862574F100822AFF

Why Can't I Create a Customized Silent Installation Using Generate Specfile Method for the New LabVIEW Platform DVDs? Why Can't I Create a Customized Silent Installation Using Generate Specfile Method for the New LabVIEW Platform DVDs?The software Suite Installer, when called using setup/h, shows the error This Software suite installer invokes multiple software URL: http://digital.ni.com/public.nsf/allkb/97E7821C1A158681862574F100488204

How Do I Coordinate Cursor Movement on a Waveform Graph in LabVIEW? LabVIEW allows for multiple cursors to be placed on the same Waveform Graph. Is there also a convenient way to coordinate the movement of these cursors on the graph? URL: http://digital.ni.com/public.nsf/allkb/191A70953A91663D862574F00057423D

LabVIEW Platform DVD Distribution Installer Prompts for Incorrect Distributions When I am attempting to install my LabVIEW Platform DVD Distribution, the installer prompt asks me to insert a disk that I do not have in my posession. Why is this and how can I get my DVD distribution to install my software correctly? URL: http://digital.ni.com/public.nsf/allkb/B6897010FA43CA64862574F00072876C

Where Can I Find the ECG VI for LabVIEW? Problem: Where Can I Find the ECG Add-In for LabVIEW? Solution: The Biomedical Startup Kit is an add-on palette to LabVIEW designed for those interested in the fields of life science and biomedical engineering. URL: http://digital.ni.com/public.nsf/allkb/AE86DC41908631A0862574EF004C827D

Is it possible to configure a digital line on an R-series board to a tri-state mode in FPGA? I would like to be able to configure my DIO lines on a R-series card to a Tri-state mode and keep it in a Single Cycle Timed Loop (SCTL). Is this possible? URL: http://digital.ni.com/public.nsf/allkb/E9629785AC0ACC88862574EC007F42CC

LabVIEW でジョイスティックを使用する方法 プログラムの操作に使用しているマウスの他に、位置制御のためにもうひとつマウスを使おうと思いましたが、2つ目のマウスも、通常のマウスと同様にしか使えません。そこでジョイスティックの使用を考えているるのですが、LabVIEW でどのようにプログラ URL: http://digital.ni.com/public.nsf/allkb/67C0CABB438CD568862574EB0032E5FF

Why is the Key Focus Property Node Not Working Correctly? I have a control that I would like to have key focus when my application runs. However, if I use the Key Focus property node and run my program, the key focus only gets set occasionally. Why am I experiencing this behavior? URL: http://digital.ni.com/public.nsf/allkb/574298F4B70BF4E2862574EB005D0B95

How do I Enable IEPE Excitation Programmatically? I am using a third-party hardware that needs an excitation value to capture data and a NI DAQ device that supports the necessary excitation. How do I programmatically turn the excitation capabilities? URL: http://digital.ni.com/public.nsf/allkb/21D7891D9960C5BF862574EA005ADEE6

Where Can I Find the Serial Number for My LabVIEW I Received at a Conference? I received a copy of LabVIEW 8.5 or later from a conference and it appears that I did not receive a serial number with it. Now I cannot activate my product without a serial number. Where can I find it? URL: http://digital.ni.com/public.nsf/allkb/9201B042072F18C7862574E9005FC585