Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Is My DAQ Gain Affected When I Remove 'ob0' from My SCXI Channel String? I use the syntax 'obz!scx!mdy!a' in my program when acquiring signals from my SCXI module. With input limits set to -0.001 V to + 0.001 V on my SCXI module, specifying the channel string 'ob0!sc1!md1!0:7' causes the gain on the DAQ board to be set to 5. Specifying the channel string 'sc1!md1!0:7' URL: http://digital.ni.com/public.nsf/allkb/E2822BF07C458189862569D20073FF6D

Error -10007 AI Group Config When Using SCXI-1100 Voltage VI with SCXI-1102 When using the SCXI-1100 Voltage VI to test the SCXI-1102, I get an error -10007 AI Group Config, which results in no acquisition. URL: http://digital.ni.com/public.nsf/allkb/12B840BDB4AFC81A862562E300743395

Can't obtain a gain of 1000 with SCXI-112x gain set to 1000 using an E Series board and NI-DAQ 4.8.0 in LabVIEW. I have an E Series device and an SCXI-112X module. I set channel 0 on the SCXI-112X module to a gain of 1000 on the module and in software. I set the E Series device to bipolar input range (+-5V). When I run AI Config with input settings of -.005 to .005 and open AI Hardware URL: http://digital.ni.com/public.nsf/allkb/BB930798EF3238408625622100545337

I Cannot Scan My SCXI-1200 Channels and Other Module Channels Simultaneously When trying to put SCXI-1200 channels in one element of a channel string array and other module channels in another element of the channel string array, LabVIEW returns errors. (Group Too Large for instance) URL: http://digital.ni.com/public.nsf/allkb/CF3A602DF0CAD95E86256E8E002448BD