Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Application Developed with an E-Series DAQ Device gives Error -10007 when running with DAQCard-700 Why do I get Error -10007 when running an application with my DAQCard-700? The same program works fine with an E-Series DAQ device. URL: http://digital.ni.com/public.nsf/allkb/E766EBB1BF270BEE48256F7E006D2E58

Do the E-Series Analog Output Digital Triggering Examples in LabVIEW Work with the 671x Family of Analog Output Boards? I have a 671x board and I want to use digital triggering. Can I use the E-Series analog output digital triggering examples that ship with LabVIEW? URL: http://digital.ni.com/public.nsf/allkb/7822F6F36BC00852862568FC007549D9

CTR Buffer Read for DAQ-STC Counters Works Fine with Counter 1 but Gives Error -10920 with Counter 0 I get error -10920 when I perform buffer read with counter 0 on AT-MIO-16E-10 (or any E-Series Board) using the Meas Buffered Pulse-Period (DAQ-STC).vi in LabVIEW. I can run this successfully on counter 1. The same VI works fine with counter 0 on a different board. Why? URL: http://digital.ni.com/public.nsf/allkb/B488C6EE19B914E686256E8E002512D0

Digital Output Returns Error -10612 When Using an AT-MIO-16XE-50 With an AMUX-64T. Using an AT-MIO-16XE-50 with an AMUX-64T in LabVIEW 3.1.1 I call DIO Port Config and configure all the digital lines for output. I then call AI Acquire Waveforms to collect data via the AMUX-64T. After the AI Acquire Waveforms, I call DIO Port Write with lines 0 through 3 masked out. I get a -10612 URL: http://digital.ni.com/public.nsf/allkb/E2CA2B258345DBE9862561C6007E9F64