Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

ECU Measurement and Calibration Toolkit 2.1.0 with LabVIEW 8.5 Problem: How do I use the ECU Measurement and Calibration Toolkit with LabVIEW 8.5? Solution: The ECU Measurement and Calibration Toolkit 2.1.0 does not give the option to install to a LabVIEW 8.5 Directory, however you can install the files to a LabVIEW 8. URL: http://digital.ni.com/public.nsf/allkb/1346587707E09280862574340040E3CA

Timeout Error -301096 Using the ECU Measurement and Calibration Toolkit With a Series 1 NI-CAN board I am using the ECU Measurement and Calibration toolkit with a Series 1 NI-CAN board, and I get Error -301096, a timeout error, when I try to run any of the shipping examples. How do I get rid of this error? URL: http://digital.ni.com/public.nsf/allkb/C54F2138F47C4230862572D2005F0318

How to use the ECU MC Toolkit with cRIO 985x C-Series Hardware? The ECU MC Toolkit is based on the NI-CAN 'Channel API'. Channels represents a field in the data of a specific ID, scaled to a floating point value in physical units (such as Volts or Revolutions-per-minute).The cRIO 985x hardware supports the 'Frame API' only. How can I use my ECU MC URL: http://digital.ni.com/public.nsf/allkb/63C22E48B5BC7B5986257279007D672F

How to use the ECU MC Toolkit with USB-CAN Hardware? The ECU MC Toolkit is based on the NI-CAN "Channel API". Channels represents a field in the data of a specific ID, scaled to a floating point value in physical units (such as Volts or Revolutions-per-minute).The USB-CAN hardware supports the "Frame API" only. How can I use my ECU MC URL: http://digital.ni.com/public.nsf/allkb/BC8E214BB015716C8625727400774438

どのようにしてUSB-CANハードウェアでECU計測・校正ツールキットを使用するのでしょう。 ECU計測・構成ツールキットは”チャンネルAPI”で書かれています。 USB-CANハードウェアは”フレームAPI”のみサポートしています。 どのようにしてUSB-CANデバイスでECU計測・構成ツールキットを使用すればいいのでしょう。 URL: http://digital.ni.com/public.nsf/allkb/3B05D809627A46D9862572B200421978

Why do the examples not run with my ECU although they run fine with the Test ECU examples? After installing the ECU Measurement and Calibration Toolkit, I can run the accompanying examples against the Test ECU examples (CCPECU, XCPECU). However, if I run the examples against my own ECU, they fail, either with an error message, or they do not show data. URL: http://digital.ni.com/public.nsf/allkb/C99249A62D6CB4A7862571AE003BDF6D