Upgrading NI DAQmx Automatically updates LabVIEW SignalExpress
I installed a new version of NI DAQmx or Device Drivers Disc and it updated my copy of LabVIEW Signal Express as well. Why did this happen?
URL: http://digital.ni.com/public.nsf/allkb/B91A7ED4D3F98E04862575D30002694B
|
LabVIEW Code Generation in SignalExpress Fails
I have built a SignalExpress project and would like to move this code to LabVIEW for further development. I have tried selecting Tools»Generate Code»LabVIEW Diagram. When I do this, nothing happens. How can I export my code to LabVIEW?
URL: http://digital.ni.com/public.nsf/allkb/8F8676AD61C2686C862575C5004A2C00
|
Why do I get Error -89137 When Using Counter and Digital Tasks?
I am currently using Counter and Digital I/O together. When I have two simultaneous counter and digital acquisition or generations, I see inconsistent behavior between my two counters. I can do digital and counter I/O perfectly fine on counter 1, but when I try using counter 0, I receive the
URL: http://digital.ni.com/public.nsf/allkb/28F2757575F9C77B862575C2005F36B4
|
Link Instruments Device Not Working With Link Software After LabVIEW Install
After I install LabVIEW and the NI-VISA drivers I can no longer use my DSO-8000 scope from Link Instruments with the software it came with; the software gives the error device not available. Also now when I plug in my USB Link device I am asked if I want to use it with SignalExpress/LabVIEW. How do
URL: http://digital.ni.com/public.nsf/allkb/2B97BA82384F6952862575A00058C906
|
Signal Express: Display All Data History in Data View While Acquiring Continuously
I am using Signal Express and want to see all data points over time in the same graph display. If the Acquisition Mode is One Sample (On Demand), I can use a chart to see the data history. However, if the Acquisiton Mode is N Samples or Continuous, I can only use a graph, which does not allow me to
URL: http://digital.ni.com/public.nsf/allkb/4D5F25B63ADC160A862575920064B20F
|
Missing Samples in Data View of Signal Express From a Continuous Acquisition
In the data view of my continuous acquisition only a portion of my view is filled with data. How can I see a larger block of data in one view?
URL: http://digital.ni.com/public.nsf/allkb/D2656DFA453FAF848625758C0066433E
|
LabVIEW SignalExpress 3.0 Code Conversion to LabVIEW 8.0 Fails
As of the LabVIEW 8.6 release, the data acquisition and modular instruments drivers no longer support LabVIEW 8.0. LabVIEW SignalExpress 3.0 still contains the support for LabVIEW 8.0 and ships with LabVIEW 8.6. As a result, I notice that LabVIEW SignalExpress installs support for LabVIEW 8.0 so
URL: http://digital.ni.com/public.nsf/allkb/F8F71B41F1BBC0DE8625758C00655387
|
Why Do I Have to Specify a Number of Samples to Read When Continuously Acquiring Data?
Why Do I Have to Specify a Number of Samples to Read When Continuously Acquiring Data?
URL: http://digital.ni.com/public.nsf/allkb/8EF7084B908ABF6686257589007C97DF
|
SignalExpress Freezes when Converting Log to ASCII Text File
I have set my SignalExpress project to log data and to automatically export the log to an ASCII file. However, when my data is acquired, SignalExpress seems to freeze and I must stop it using the Task Manager. Why does this happen and how can I log my data to an ASCII file properly?
URL: http://digital.ni.com/public.nsf/allkb/90C1E123127124B08625757000587A17
|
Why Does My SignalExpress Project File Continue to Increase in Size Each Time I Save the File?
I have noticed that my SignalExpress project file continues to increase in size, even when I save the file after no changes have been made. How can this be corrected?
URL: http://digital.ni.com/public.nsf/allkb/5F10F52CFD43615386257543007080F3
|
