Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

設定Compact Vision Systems下Vision Builder AI起始Inspection。 我已在Vision Builder for Automated Inspection (VBAI)中建立一個Inspection而我想將我的Inspection發布到Compact Vision System (CVS)並在啟動時自動執行。請問我該如何設定? URL: http://digital.ni.com/public.nsf/allkb/C7BC89EF46FF7781862571640035FA0A

CVS에서 동시에 VBAI 2.6.1과 LV-RT 8.0을 설치할 수 없습니다. 저는 제 Compact Vision System(CVS)에 Vision Builder for Automated Inspection 2.6.1 과 LabVIEW Real-Time 7.1.1을 가지고 있습니다. 저는 LabVIEW Real-Time 8.0으로 업그레이드를 하려 하는데, 'Cannot process install because other dependencies are required: LabVIEW Real-Time 7.1.1. '라는 에러가 발생합니다. 저에게 URL: http://digital.ni.com/public.nsf/allkb/45E76417FC59692F86257107000C3075

What Versions of Vision Builder for Automated Inspection and LabVIEW RT Can I Have on a CVS or Smart Camera at the Same Time? Which versions of Vision Builder for Automated Inspection (VBAI) and LabVIEW Real-Time will work together on a Compact Vision System (CVS) or Smart Camera? URL: http://digital.ni.com/public.nsf/allkb/01C1CC3AF27EEB35862570F8007139AF

哪幾版的VBAI和LabVIEW RT能夠同時在CVS上運行？ 在我的Compact Vision System (CVS)中，Vision Builder for Automated Inspection為2.6.1版，LabVIEW Real-Time的為7.1.1版。我試著把LabVIEW Real-Time升级到8.0版，卻得到如下的錯誤“Cannot process install because other dependencies are required: LabVIEW Real-Time 7.1.1.”我也嘗試在CVS上安装Vision Builder AI URL: http://digital.ni.com/public.nsf/allkb/529D6CF671DE223686257221000BC62D

LabVIEW를 실행한 다음에는 Vision builder와 CVS와 연결이 끊깁니다. LabVIEW를 실행한 다음에, 제가 Vision Builder AI 스크립트를 실행시키려 했을때, 연결이 실패됐고, 서버가 다운됐다는 에러를 보게됩니다. LabVIEW를 실행하기 전에 Vision Builder 스크립트를 실행시킬 수 있었고, 제 CVS가 잘 설정되었다는 것을 확인했습니다. 왜 이런 에러가 URL: http://digital.ni.com/public.nsf/allkb/137863FAFC2E5D44862570A500061458

Vision Builder Will Not Connect with CVS After Opening LabVIEW After opening LabVIEW, when I try to run Vision Builder AI scripts, I get an error saying that the connection failed and that the server may be down. I am able to run Vision Builder scripts before I open LabVIEW and know my CVS is configured properly. Why am I getting this error? URL: http://digital.ni.com/public.nsf/allkb/A9E00B554ED38B398625709D007D6572

開啟LabVIEW之後無法使用Vision Builder與CVS連接 開啟LabVIEW與RT端CVS連接後，無法再使用Vision Builder AI與其相連，會得到錯誤訊息，寫著Vision Builder server已關閉。開啟LabVIEW之前可以使用Vision Builder for AI與CVS連接，而且我確定所有的設定皆正確，為何會發生這樣的情形呢 URL: http://digital.ni.com/public.nsf/allkb/7A0530A476F7FCFA862570AB000177C8

CVS上VGA的解析度是多少？我可以修改它嗎？ 我正在用CVS 145x 及 Vision Builder for Apection (VBAI). 建立機械視覺的應用。什麼樣解析度的螢幕可以支援CVS? URL: http://digital.ni.com/public.nsf/allkb/862CF8F3F1167A7786256F16002DF9D6

What is the Resolution of the VGA Output on the CVS and Can it be Modified? I am setting up a vision application where I will be using a Compact vision System (CVS) 145x and Vision Builder for Automated Inspection (VBAI). I want to select a monitor to connect to the VGA port and need to know what resolution is supported by the CVS. Will it just be a standard VGA URL: http://digital.ni.com/public.nsf/allkb/8934F644FF757CB9C1256F02004EB61B